clay Posted April 18, 2015 Share Posted April 18, 2015 Right I am not being a complete muppet. but how do I get the new belt back on.? I took the old belt off ok. but I just cant see how you get it back on. LOL Is their a nack to it, Link to comment Share on other sites More sharing options...
Kendo11 Posted April 18, 2015 Share Posted April 18, 2015 It's very easy mate, you can do it with everything in place, you just need to press across on the tensioner to release the tension, then feed the belt around the same way the old one came off Link to comment Share on other sites More sharing options...
Chris Wilson Posted April 18, 2015 Share Posted April 18, 2015 DO NOT let the tensioner whang over to fully extended or you WILL break its casting. New ones are not cheap... Link to comment Share on other sites More sharing options...
clay Posted April 18, 2015 Author Share Posted April 18, 2015 Its like the tensioner wont move far enough. it dosent seem to be broken. Link to comment Share on other sites More sharing options...
Chris Wilson Posted April 18, 2015 Share Posted April 18, 2015 There are marks on it to show how far it can move. Is the belt routed correctly? You *DID* make a little drawing of the routing before removing it??? Sometimes there's a sticker under the bonnet showing the routing. It's also in the workshop manual. Link to comment Share on other sites More sharing options...
Kendo11 Posted April 18, 2015 Share Posted April 18, 2015 And on Google. I did have a couple saved from when I did it but have since deleted them unfortunately. Link to comment Share on other sites More sharing options...
Kendo11 Posted April 18, 2015 Share Posted April 18, 2015 Loads of info on Google, almost certainly also on the forum. Link to comment Share on other sites More sharing options...
clay Posted April 18, 2015 Author Share Posted April 18, 2015 WELL I AM A MUPPET. I took the undertray off so I could see better, and I was trying to rout it wrong, oooooppppssss. and its all sorted now thank you, Link to comment Share on other sites More sharing options...
Kendo11 Posted April 18, 2015 Share Posted April 18, 2015 Good news Link to comment Share on other sites More sharing options...
Recommended Posts
Please sign in to comment
You will be able to leave a comment after signing in
Sign In Now