Tommyd16 Posted February 17, 2015 Share Posted February 17, 2015 Was having a little poke around the engine and I noticed a what I think a hose is missing. Was only a quick look so didn't have time to have a good look around as it was only a minute ago but I take it there should be a hose here; http://tapatalk.imageshack.com/v2/15/02/17/8d1bb1a99fc53e4d9ed6adc7b19c2b09.jpg One of these is missing. Can't remember which one. Where should they go? Cheers! Link to comment Share on other sites More sharing options...
Ian C Posted February 17, 2015 Share Posted February 17, 2015 One goes to the throttle body before the butterfly, one goes to the plenum just after the butterfly. The valve on the PAS pump lets air bypass the butterfly to raise the idle slightly when using the power steering at rest/coasting so the extra load on the engine doesn't cause idle problems. If you've not go a hose connected to the post-butterfly barb on the plenum you might find you've got a high idle, around 1200rpm Link to comment Share on other sites More sharing options...
Tommyd16 Posted February 17, 2015 Author Share Posted February 17, 2015 Excellent cheers. I have noticed a high idle in the last week. Was going to clean the iavc but I guess this hose must of popped off. Little bugger! Thanks mate Link to comment Share on other sites More sharing options...
Tommyd16 Posted February 18, 2015 Author Share Posted February 18, 2015 Sorted thanks. High idle has gone now [emoji106] Link to comment Share on other sites More sharing options...
Recommended Posts
Please sign in to comment
You will be able to leave a comment after signing in
Sign In Now