supra_24 Posted October 10, 2014 Share Posted October 10, 2014 Hey guys, Had my clutch replaced today and we noticed some one had slightly modified the propshaft bearing mount. By the looks of it to access bolts. Now is this ok to drive as it is. I have hammerite to prevent rust build up. Or is there any way to weld up the area? Any advise is appreciated. Regards Ash Link to comment Share on other sites More sharing options...
David P Posted October 10, 2014 Share Posted October 10, 2014 What a bodge, it looks like the captive nuts have been stripped, then drilled out to clear the bolts and then holes cut to get a spanner onto the replacement nuts. It could do with being welded back up with fresh captive nuts. Link to comment Share on other sites More sharing options...
supra_24 Posted October 10, 2014 Author Share Posted October 10, 2014 If I can't get it welded at the moment is it safe to drive? Link to comment Share on other sites More sharing options...
supra_24 Posted October 10, 2014 Author Share Posted October 10, 2014 Also, any advice I could give to my garage in terms of welding it. Is it a hard job? Link to comment Share on other sites More sharing options...
David P Posted October 10, 2014 Share Posted October 10, 2014 It looks as though you've already been driving it like it, so a little more won't hurt, but I wouldn't want to give it any WOT. Also, any advice I could give to my garage in terms of welding it. Is it a hard job? Fiddly. Link to comment Share on other sites More sharing options...
Recommended Posts
Please sign in to comment
You will be able to leave a comment after signing in
Sign In Now