markylee Posted July 24, 2014 Share Posted July 24, 2014 In the past my tailgate brake light was removed and smoothed over, I have now decided to put it back in, it looks like( from the inside ) it has had a metal plate spot welded on to the tailgate and then filled, before I start the job of removing the filler,are their any brackets that need to be purchased for the light to attatch too, or do you think I would be able to drill some holes in the plate and then attatch it to that? all suggestions welcome ,,,,,,,,,,thanks Link to comment Share on other sites More sharing options...
Mk4Gaz Posted July 24, 2014 Share Posted July 24, 2014 Being honest, it would probably be far easier to just source another tailgate, paint it, swap the bits over and bin or sell your current one on bud. Regarding brackets, being honest I don't know, I've never looked at how they're mounted Link to comment Share on other sites More sharing options...
Hassan Posted July 24, 2014 Share Posted July 24, 2014 Yes it has two brackets on the inside. Link to comment Share on other sites More sharing options...
Recommended Posts
Please sign in to comment
You will be able to leave a comment after signing in
Sign In Now