ashbuster Posted January 26, 2014 Share Posted January 26, 2014 (edited) hi guys i was wondering if i have this right x = where ive cut and completely removed 1 = remove completely? and use the map sensor on the greddy emanage ultimate? diamond shape = i plug these back in star shape = i can blank off or use for boost gauge/boost controller /greddy map sensor blue star is cam breather (2nd photo) star = vac hose , cap off i do have this right dont i ? Edited January 26, 2014 by ashbuster (see edit history) Link to comment Share on other sites More sharing options...
ashbuster Posted January 26, 2014 Author Share Posted January 26, 2014 (edited) use the other stars (outlets) or blank off messed up in the first post one of the ports is for the cam breather , changed the star to blue. edited first post the tiny one on that side on the throttle body is one of the ps vac hoses? Edited January 26, 2014 by ashbuster (see edit history) Link to comment Share on other sites More sharing options...
ashbuster Posted January 26, 2014 Author Share Posted January 26, 2014 Link to comment Share on other sites More sharing options...
ashbuster Posted January 27, 2014 Author Share Posted January 27, 2014 Bump Link to comment Share on other sites More sharing options...
ashbuster Posted January 28, 2014 Author Share Posted January 28, 2014 there are 2 ports on the throttle body, 1 small one near the back just before the manifold and another at the front of the throttlebody am i right in thinking these are the 2 for the power steering idle up the front one before the plate and then it goes to the one after the plate, both on the throttlebody Link to comment Share on other sites More sharing options...
ashbuster Posted January 29, 2014 Author Share Posted January 29, 2014 165 views...very helpful Link to comment Share on other sites More sharing options...
Recommended Posts
Please sign in to comment
You will be able to leave a comment after signing in
Sign In Now