dr_jekyll Posted January 5, 2014 Share Posted January 5, 2014 a friend of mine has just picked up a na that was originally a manual but has at some point become an auto. my question is, is the wiring correct to fit auto clocks with the gear indicator or is there a plug that will not be there , I cant remember from memory and I have no auto dials to check. Link to comment Share on other sites More sharing options...
jason a Posted January 5, 2014 Share Posted January 5, 2014 im sure if you go auto to manual, the auto clocks, well the rev counter does nt work, not sure if that helps you im affraid Link to comment Share on other sites More sharing options...
Tsia Posted January 5, 2014 Share Posted January 5, 2014 I have auto dials on my NA-TT and they work fine, rev counter included. I do get a hilarious bus-like beeping as I reverse, though. Link to comment Share on other sites More sharing options...
dr_jekyll Posted January 5, 2014 Author Share Posted January 5, 2014 all I need to know is if the gear indicators will work Link to comment Share on other sites More sharing options...
Tsia Posted January 5, 2014 Share Posted January 5, 2014 No, it doesn't tell you what gear you're in on mine. Other than reverse. Link to comment Share on other sites More sharing options...
dr_jekyll Posted January 5, 2014 Author Share Posted January 5, 2014 is yours a manual with auto clocks? we have an auto with manual clocks Link to comment Share on other sites More sharing options...
Tsia Posted January 5, 2014 Share Posted January 5, 2014 Ah, never mind then! Yes, mine is a manual with auto clocks. Link to comment Share on other sites More sharing options...
Recommended Posts
Please sign in to comment
You will be able to leave a comment after signing in
Sign In Now