alex341 Posted August 30, 2013 Share Posted August 30, 2013 Im almost nearing the end of my single turbo conversion, can anyone help me with what plugs i should run? Link to comment Share on other sites More sharing options...
Dnk Posted August 30, 2013 Share Posted August 30, 2013 Check the FAQ section, theres a whole thread on Spark plugs for every set up Link to comment Share on other sites More sharing options...
Dnk Posted August 30, 2013 Share Posted August 30, 2013 http://www.mkivsupra.net/vbb/showthread.php?41927-FAQ-Spark-plugs Link to comment Share on other sites More sharing options...
alex341 Posted August 30, 2013 Author Share Posted August 30, 2013 Sweet, thank you. Witht the cost of everything else so far i was expecting them to be far more expensive. Link to comment Share on other sites More sharing options...
Dnk Posted August 30, 2013 Share Posted August 30, 2013 Search ebay or look on http://www.sparkplugs.co.uk for best prices Link to comment Share on other sites More sharing options...
Tricky-Ricky Posted August 30, 2013 Share Posted August 30, 2013 Im almost nearing the end of my single turbo conversion, can anyone help me with what plugs i should run? What turbo and boost will you be running and what power figure are you aiming at? these will dictate the plug grade, I ran one grade colder at about 520BHP with no problems, if your looking at more than that I would perhaps try two grades colder, a normal copper core plug will be fine, there is nothing to be gained by fitting iridium plugs, they are just intended for longer service life in engines that have hard to reach plugs. Link to comment Share on other sites More sharing options...
alex341 Posted August 30, 2013 Author Share Posted August 30, 2013 I'm running a borg warner s366 turbo set up, im unsure of how much boost it will run yet but im aiming for around 500hp Link to comment Share on other sites More sharing options...
Recommended Posts
Please sign in to comment
You will be able to leave a comment after signing in
Sign In Now