antno Posted May 7, 2013 Share Posted May 7, 2013 I'm running without aircon and with the larger ati crank pulley. I was advised to use the std size belt (6pk1936) but this doesn't end up with the marks in the right place on the tensioner marks. It's too long basically. Would a 1926 belt work. The belt is brand new by the way. Does anyone else use the same combination of pulleys? Link to comment Share on other sites More sharing options...
mihai Posted May 7, 2013 Share Posted May 7, 2013 I have the same problem, my aircon is out except the compressor, can i separate the compressor from the pulley and use the stock belt? Link to comment Share on other sites More sharing options...
antno Posted May 7, 2013 Author Share Posted May 7, 2013 I'm not sure about that. I have removed the compressor and pulley completely but the ati crank pulley is larger than the std one so takes up the slack. But not enough for the std belt. Plus now I thought about it, it must change the speed of the belt by a lot I would of thought. Anyone know how much you can get away with over speeding the water pump , pas pump and alternator? Link to comment Share on other sites More sharing options...
Kaan W Posted May 7, 2013 Share Posted May 7, 2013 I would like to know this also, at the moment I have a stock pulley but with the air con compessor removed and the belt is a PK 1865 iirc. I have an ATI pulley to go on soon which I guess calls for a longer belt but which one I dont know. Link to comment Share on other sites More sharing options...
antno Posted May 8, 2013 Author Share Posted May 8, 2013 What size belt do you use if you just replace the std pulley for a ati one and leave every thing else std. Cheers Link to comment Share on other sites More sharing options...
antno Posted May 9, 2013 Author Share Posted May 9, 2013 ?? Link to comment Share on other sites More sharing options...
antno Posted May 13, 2013 Author Share Posted May 13, 2013 Anyone replaced there standard pulley with an ati one and still has aircon? Link to comment Share on other sites More sharing options...
buster Posted February 24, 2014 Share Posted February 24, 2014 Did your fine out what belt was needed as I'm about to run same spec? Link to comment Share on other sites More sharing options...
Recommended Posts
Please sign in to comment
You will be able to leave a comment after signing in
Sign In Now