kosmic Posted August 12, 2005 Share Posted August 12, 2005 Been trying to remove the exhaust system today from the 2nd cat back. Jacked up the car, axle stands, under the car, removed the first of the two bolts....fine, went to remove the second....BUGGER...just rounded of the head!!! Its the drivers side one, with v little access too. Any suggestions to get the bleedin bolt off?! :thumbdown Link to comment Share on other sites More sharing options...
Chris Wilson Posted August 12, 2005 Share Posted August 12, 2005 Angle grinder. Welding torch. Patient use of a broken hacksaw blade. In that order. Link to comment Share on other sites More sharing options...
kosmic Posted August 12, 2005 Author Share Posted August 12, 2005 Angle grinder. Welding torch. Patient use of a broken hacksaw blade. In that order. oh excellent. may have to get the dremmel out with the appropriate disc, its a bit too narrow for a full size grinder. thanks Chris! Link to comment Share on other sites More sharing options...
D3xt3r Posted August 12, 2005 Share Posted August 12, 2005 Or just an downpipe and remove everything from the turbo back So youi dont have to loose that bolt Link to comment Share on other sites More sharing options...
kosmic Posted August 12, 2005 Author Share Posted August 12, 2005 got to keep the cats on mate as im just replacing with a cat back system!! Link to comment Share on other sites More sharing options...
Recommended Posts
Please sign in to comment
You will be able to leave a comment after signing in
Sign In Now