a98pmalcolm Posted August 13, 2012 Share Posted August 13, 2012 Does anyone know if the Banjo bolts that go into rear Brembo brakes the same size as the stock ones? Thanks Link to comment Share on other sites More sharing options...
Chris Wilson Posted August 13, 2012 Share Posted August 13, 2012 Probably. Brembo have caliper spec sheets that cite the inlet thread size, and the nipple thread and taper seat sizes. Link to comment Share on other sites More sharing options...
a98pmalcolm Posted August 13, 2012 Author Share Posted August 13, 2012 ok thanks Chris. I will find out tomorrow when We try. I will post up if they did or not for members future reference... Link to comment Share on other sites More sharing options...
a98pmalcolm Posted August 14, 2012 Author Share Posted August 14, 2012 They are the same Banjo bolts as stock on the rears.. Link to comment Share on other sites More sharing options...
Chris Wilson Posted August 14, 2012 Share Posted August 14, 2012 In that case the fronts are almost certainly the same, so that's handy for you If you need this sort of stuff I recommend Faye at: http://www.speedflowshop.co.uk/ She's very helpful, reasonably priced and holds good stock levels. Link to comment Share on other sites More sharing options...
a98pmalcolm Posted August 14, 2012 Author Share Posted August 14, 2012 Thanks chris. The work is done now. We used the original Banjos Link to comment Share on other sites More sharing options...
Recommended Posts
Please sign in to comment
You will be able to leave a comment after signing in
Sign In Now