2soops Posted August 11, 2012 Share Posted August 11, 2012 Was hoping someone may be able to help and provide a part number for a brake master cylinder. My car started as a Jspec TT Auto, but is now a 6spd Manual. I am about to upgrade to UK brakes, and read on here the upgrade often leaves a spongy feeling brake pedal. I assume this is because of the extra pistons in the Uk set up, and slightly more fluid being required to push them out. I spoke to Toyota earlier about whether the UK brakes had a larger master cylinder for the extra pistons, and they confirmed there are 4 different part numbers for varying sizes/models/years. They couldn't however tell me which was the largest internal diameter. Does anyone on here know a part number for the larger spec master cylinder so i can get one ordered, my car also has abs if that makes a difference. Thanks for any help Al Link to comment Share on other sites More sharing options...
Nic Posted August 11, 2012 Share Posted August 11, 2012 UK Spec Supra BMC http://img715.imageshack.us/img715/6972/picture1ue.jpg Link to comment Share on other sites More sharing options...
2soops Posted August 12, 2012 Author Share Posted August 12, 2012 Thanks Nic, don't suppose you know if this is definately the larger bore master cylinder. Are all UK spec ones the same as i don't want to end up with one the same bore as ive got already. Sory to be a pain Link to comment Share on other sites More sharing options...
mixad Posted October 8, 2012 Share Posted October 8, 2012 I would also like to know if there are larger bore master cylinders? Link to comment Share on other sites More sharing options...
Recommended Posts
Please sign in to comment
You will be able to leave a comment after signing in
Sign In Now