throttle body bolts

[jay200bhp]

guys im sat at work and i need to find out what length and thread (pitch) etc the two bolts on the throttle body to inlet are infront of the little "trac" aluminium stcker plate thing??

any ideas?

 

J

[Lude]

they are about an inch long, and do up with a 12mm socket but thats as technical i can be sorry!

 

dont know how to measure them

[Chris Wilson]

M8 x 1.25 mm pitch. i have throttle body on the bench can measure it tomorrow for length, but I am not going out and messing with the alarms, and stuff, and getting the dogs going tonight If you still need this tomorrow just e-mail me and I'll sort it for you.

[jay200bhp]

gents a great help many thanks! chris are they about 25 mm long or long in your opinion?as accurate as i need

[Chris Wilson]

Are we talking of the same things? I am talking about the studs that hold the TB onto the plenum. They have 12 mm socket size nuts on them, of 8 mm x 1.25 mm thread form. if you don't have the studs you could use bolts. they are a lot longer than 25 mm, more like 90 mm? I think the top and bottom pair are different lengths?

[jay200bhp]

Are we talking of the same things? I am talking about the studs that hold the TB onto the plenum. They have 12 mm socket size nuts on them, of 8 mm x 1.25 mm thread form. if you don't have the studs you could use bolts. they are a lot longer than 25 mm, more like 90 mm? I think the top and bottom pair are different lengths?