Blitz nur spec :(

[WaLKeRR]

my blitz nur spec has broke its come clean off :o from the silencer box it has a clean break god knows how, i was reversing in the petrol station then all of a sudden scrape, i look underneath exhaust hanging down any SS welders in northwest that could fix this ASAP! i will check this page tomorrow as i am off to bed a lil gutted

[Josh]

Strange if you'd not hit anything! Surprised it came clean off. No dents?

[WaLKeRR]

Nope just clean came off the back of the silencer box, and when i say clean the cut is clean an angle grinder would be hard to cut it that clean, and nope didnt hit anything i rolled backwards at like 2mph then scrape

[Colin-mkiv]

SS is quite brittle, it has less give than MS. any constant vibration will cause it to snap at a stresspoint. Check all your rubbers are supporting the system when you get it sorted mate.

[WaLKeRR]

yeh all rubbers were on, i was thinking that..... it had been moved over to one side to fit the rear of the bumper perfectly i thought that may have caused the problem

[Pulley]

I recently bought a nur Spec r exhaust second hand and it had a weld crack running almost all the way round one of the silencer joining welds, as I was adding a skid plate I ground out all the welds and re welded with decent rod, seems the welds on my exhaust were pretty contaminated and poor from the factory