pbryant_knight Posted March 24, 2012 Share Posted March 24, 2012 Hi All, Just a quick question, My Overdrive Off light on the dashboard keeps flasing when the Overdrive is on? Obviously it stays on when the Overdrive is off but does anyone have any idea why it could be flasing intermittantly when the O/D is on? Cheers Peter Link to comment Share on other sites More sharing options...
Digsy Posted March 24, 2012 Share Posted March 24, 2012 Check for fault codes. Sometimes a code 42 can trigger a flashing OD OFF light. Link to comment Share on other sites More sharing options...
pbryant_knight Posted March 24, 2012 Author Share Posted March 24, 2012 What is a code 42? Link to comment Share on other sites More sharing options...
Digsy Posted March 24, 2012 Share Posted March 24, 2012 Speed sensor error. Usially causes the malfunction light to come on too, though. Do a search on here for how to check the fault codes and post up if any are stored. Link to comment Share on other sites More sharing options...
SamuraiFlash Posted March 24, 2012 Share Posted March 24, 2012 I also have this problem Link to comment Share on other sites More sharing options...
hodge Posted March 24, 2012 Share Posted March 24, 2012 Usual cause is either a faulty speedo converter or speed sensor. Do a search there's hundreds of threads about it. Link to comment Share on other sites More sharing options...
Robzki Posted March 24, 2012 Share Posted March 24, 2012 Usual cause is either a faulty speedo converter or speed sensor. Do a search there's hundreds of threads about it. Although more than likely the buffer circuit in the odometer, splicing the 2 wires behind the odo usually solves it. Have a search to find the wire colours its all been discussed many times Link to comment Share on other sites More sharing options...
hodge Posted March 25, 2012 Share Posted March 25, 2012 This doesn't always work. A good quality speedo converter is the best option IMO. Link to comment Share on other sites More sharing options...
pbryant_knight Posted March 25, 2012 Author Share Posted March 25, 2012 Well i think my soulution will be to stick a piece of tape accross the light My speedo is still in KPH and instead of a converter i've bought a GPS digital speedo instead. Link to comment Share on other sites More sharing options...
Digsy Posted March 25, 2012 Share Posted March 25, 2012 You haven't checked the fault codes yet have you? It takes about five minutes and all you need is short peice of wire. A search on here will give you the instructions how. Link to comment Share on other sites More sharing options...
pbryant_knight Posted March 25, 2012 Author Share Posted March 25, 2012 Nah, not yet. I'll wait until it comes out of the Bodyshop then take it to a friend that has a proper code reader. Link to comment Share on other sites More sharing options...
Recommended Posts
Please sign in to comment
You will be able to leave a comment after signing in
Sign In Now