pezzler Posted October 17, 2011 Share Posted October 17, 2011 I recently replaced a load of engine loom connectors, since then I have been getting an idle AFR of around 17-18; previously I had been getting a consistant 14.5-15 I checked the error codes and it turns out I have a code 24 stored (short in IAT circuit/faulty IAT/ECU....bla bla) I think my first port of call would be to check that I have put the wires in to the connector the right way round, does anyone have a picture of their connector that they'd like to share with me - I have a pink wire and a brown wire, so I guess its a question of pink or brown! oh, its a J-spec pre VVTi TT Auto Thanks Link to comment Share on other sites More sharing options...
Chris Wilson Posted October 17, 2011 Share Posted October 17, 2011 AFAIK they are not polarity conscious, they are just a thermistor. Link to comment Share on other sites More sharing options...
pezzler Posted October 25, 2011 Author Share Posted October 25, 2011 Only just got chance to see this Thanks though Chris, was having a blonde moment; once I got in from the cold and dark, I thought the exact same thing .....stupid Toyota.........owner Link to comment Share on other sites More sharing options...
Chris Wilson Posted October 25, 2011 Share Posted October 25, 2011 No worries mate, I am very much an amateur with electronics, but trying hard to improve my knowledge Link to comment Share on other sites More sharing options...
Recommended Posts
Please sign in to comment
You will be able to leave a comment after signing in
Sign In Now