pranavghule Posted July 18, 2011 Share Posted July 18, 2011 hii guys wanted to swap the bonnet of my car this afternoon so was wondering if there was any writeup on that if not can u guys give me some tips on how to align it thnx Pranav Link to comment Share on other sites More sharing options...
dave finch Posted July 18, 2011 Share Posted July 18, 2011 dont tighten the bolts up tight leave them1/4 turn loose move it about till the gaps look perfet either side and the tighten them up thats all i do might take 2 of you with such a big bonnet so enlist a buddy Link to comment Share on other sites More sharing options...
Nic Posted July 18, 2011 Share Posted July 18, 2011 http://www.turbosupras.com/pdfs/JZA80%20TSRM/BO.pdf Link to comment Share on other sites More sharing options...
dwayne Posted July 18, 2011 Share Posted July 18, 2011 you will have to lose the centering bolts to adjust it (shown in nic's diagram above). you wont get anywhere without doing that, took me a while to figure why i couldnt adjust mine Link to comment Share on other sites More sharing options...
Recommended Posts
Please sign in to comment
You will be able to leave a comment after signing in
Sign In Now