bodilx6 Posted June 16, 2011 Share Posted June 16, 2011 Finally I got my SLD installed correctly (moved from the speedo to the ECU) and my Active Spoiler moves at the right speeds and so on. BUT not I cannot engage the cruise control over 70mph/112kph. I'm guessing this is a j-spec limit as their speed limit over there is 115 kph. So, as my SLD works (can pass the 110mph/180kph) limit, how do I go around removing the limiter for the cruise control? Link to comment Share on other sites More sharing options...
jackso11 Posted June 16, 2011 Share Posted June 16, 2011 I think you just need to take the speed from after the mph converter. It gets limited if it gets its feed from before where the feed is still kph. Link to comment Share on other sites More sharing options...
bodilx6 Posted June 18, 2011 Author Share Posted June 18, 2011 ah, I am not converting to mph. I'm in Denmark. I simply take the speed signal comming to the ECU and send it trough the SLD. Apparently the cruise speed limiter is ssomewhere else? Link to comment Share on other sites More sharing options...
dr_jekyll Posted June 18, 2011 Share Posted June 18, 2011 if it were me i would. fit a uk type mph speedo converter , then change the speedo itself to a 320kph dial victory Link to comment Share on other sites More sharing options...
Scott Posted June 18, 2011 Share Posted June 18, 2011 I think you need to change the cruise control ECU to a UK one. The UK one doesn't have a limit as far as I remember Link to comment Share on other sites More sharing options...
bodilx6 Posted June 18, 2011 Author Share Posted June 18, 2011 That might be an idea. Where is the cruise ECU located? Link to comment Share on other sites More sharing options...
Recommended Posts
Please sign in to comment
You will be able to leave a comment after signing in
Sign In Now