Black_Supra Posted February 16, 2011 Share Posted February 16, 2011 Hey Guys, wanna install my Defi Exhaust Temp Sensor on my 94 Jspec BPU Supra. Im not sure where to place it. In the Manifold seems to be not easy on a BPU supra, whats with the downpipe ? Directly after the turbos or is it even okay when i would place it 30 cms behind them ? Fabian Link to comment Share on other sites More sharing options...
johnny g Posted February 16, 2011 Share Posted February 16, 2011 Try to place it as close to the block as possible for the most accurate readings. Link to comment Share on other sites More sharing options...
Nic Posted February 17, 2011 Share Posted February 17, 2011 The only way you will get an accurate reading is by fitting the sensor pre-turbo. If the sensor is after the turbo you will get a reading around 200°C lower. Link to comment Share on other sites More sharing options...
Black_Supra Posted February 17, 2011 Author Share Posted February 17, 2011 okay thanks ... on bpu with stock manifolds this will be very shitty to isntall i think, right ? Link to comment Share on other sites More sharing options...
Recommended Posts
Please sign in to comment
You will be able to leave a comment after signing in
Sign In Now