Crockett512 Posted January 19, 2011 Share Posted January 19, 2011 Hi All, Now the supe has gone I've got some bits kicking around that may be of use; I might add to this if I find any more! ADDED: Also found a pair of front speaker boxes with external wiring plugs still plugged in with a bit of wiring. £10 + P& P for these! Ultralite Wheels with Toyos, See THIS thread. SOLD NA Airbox. £30 Posted JSpec Rear Calipers. Bought to swap my old ones out, which I didnt do. Still life in them, with reasonable pads, bought from Little Num £40 + P&P Passenger side A pillar trim, no grab handle - Free, will post at cost. 2 Sparco Blue Harness Pads never used - SOLD Prosport gauges - 3 Off - Oil Press, Oil Temp and Water Temp, Red stepper motor with fancy defi ceremony (More expensive type, £55+ each new). Oil Pressure cable has a broken connector on the wire that plugs into the gauge - hence £SOLD £SOLD for the others + P&P. These all include their respective sensors, water temp includes a hose adaptor. Oil Filter sandwich plate with all plugs, used for about a fortnight - SOLD Thats everything for now! PM or Email me at mattcranecustoms @ gmail.com! Thanks, Matt Link to comment Share on other sites More sharing options...
imi Posted January 19, 2011 Share Posted January 19, 2011 Can you send me a pic of the oil sandwic plate. Any details of the Thread size that the plate can support. Link to comment Share on other sites More sharing options...
Monkpower Posted January 19, 2011 Share Posted January 19, 2011 I'll take the NA airbox!! Link to comment Share on other sites More sharing options...
Crockett512 Posted January 20, 2011 Author Share Posted January 20, 2011 http://justjap.com/store/images/P/jjrsandwichplate.jpg Thats the exact plate. It's the correct thread for fitting to the engine, 3/4 UNF iirc, as I had it fitted. Sensor thread size I'm guessing 1/8" NPT as this rings a bell, but I'll check one of the sensors I have in the guages and let you know. Monkpower - PM Sent! Thanks! Link to comment Share on other sites More sharing options...
Crockett512 Posted January 20, 2011 Author Share Posted January 20, 2011 Na Airbox still available! Link to comment Share on other sites More sharing options...
straightsix Posted January 20, 2011 Share Posted January 20, 2011 Are all the airbox clips intact? Good condition? £20 posted? Link to comment Share on other sites More sharing options...
Guest drlee Posted January 21, 2011 Share Posted January 21, 2011 Hi there,would you know if these wheels would fit over k sport 356mm 8 pot front brakes? if you could pm me. Many thanks. Link to comment Share on other sites More sharing options...
Crockett512 Posted January 22, 2011 Author Share Posted January 22, 2011 Apologies for the delays guys, I'll take pics and double check bits today. Straightsix - Airbox would probably cost £20 TO post! I'll let you know about the clips asap. NA Airbox clips are perfect, the plastic hinges, metal clips etc all great condition. I've got interest in collection though so price will stay as is for time being.. Link to comment Share on other sites More sharing options...
Crockett512 Posted January 24, 2011 Author Share Posted January 24, 2011 Wheels now sold...airbox still here! Link to comment Share on other sites More sharing options...
straightsix Posted January 24, 2011 Share Posted January 24, 2011 OK - how much is the airbox going to be including postage? Link to comment Share on other sites More sharing options...
Crockett512 Posted January 25, 2011 Author Share Posted January 25, 2011 I'll get a box for it and let you know - via royal mail I'd hope a tenner at most? Link to comment Share on other sites More sharing options...
Crockett512 Posted January 27, 2011 Author Share Posted January 27, 2011 Gauges and sandwich plate now sold! Link to comment Share on other sites More sharing options...
Crockett512 Posted February 12, 2011 Author Share Posted February 12, 2011 bump! major garage clearout going on Also found a pair of front speaker boxes with external wiring plugs still plugged in with a bit of wiring. £10 + P& P for these! Link to comment Share on other sites More sharing options...
Crockett512 Posted March 12, 2011 Author Share Posted March 12, 2011 bump Link to comment Share on other sites More sharing options...
Guest wantthatone Posted March 13, 2011 Share Posted March 13, 2011 seeing as you have'nt replied to numerous PM sent to you by myself, did you know the gauges were faulty before you sold them? if so thats pretty shi@~#y Link to comment Share on other sites More sharing options...
Crockett512 Posted March 16, 2011 Author Share Posted March 16, 2011 seeing as you have'nt replied to numerous PM sent to you by myself, did you know the gauges were faulty before you sold them? if so thats pretty shi@~#y I haven't received a PM from yourself since 25/01/11, unless my PMs are not working correctly, maybe the mods could check / confirm this? The gauges were absolutely fine when I despatched them, and couldn't have described them better? The only problem was the broken cable, as described, but I purchased a new one and included this in with the package before sending, all as discussed with you? If you've had problems with the installation or anything let me know and I'll do my best to help.. perhaps best posting in here if my PMs are not working Link to comment Share on other sites More sharing options...
Guest wantthatone Posted March 16, 2011 Share Posted March 16, 2011 i paid for the new cable matt, lets get this right. the gauges are fitted by competent engineers, there initial thoughts were as there were issues with them not working, they felt thats why you sold them on. im not going to get into an argument with you as this is not the place to do it, but you know i sent messages to you regarding this both via hotmail & PM on here. i have had to pay to get the items you sold repaired with new parts. maybe you could delete some of your inbox. your well aware i even paid more than what they were advertised for as good will. to cover the cost of the new cable & to reimburse you for your time on ordering the damaged lead..... Link to comment Share on other sites More sharing options...
Crockett512 Posted March 16, 2011 Author Share Posted March 16, 2011 Yes sorry I'll confirm that, you paid the additional cost for the new cable. I've only ever had about 30 messages in my PM box so apologies I couldn't of clarified anything sooner. For what it's worth now, there was honestly nothing wrong with them other than what I described with the cable, otherwise I would have sold them as faulty; I still stand by that they were sold as described/pictured. it's not worth me trying to deceive people on these/any forums else it just messes up reputation for future transactions... Link to comment Share on other sites More sharing options...
Recommended Posts