Scott Posted November 2, 2010 Share Posted November 2, 2010 What is the exact model number? Link to comment Share on other sites More sharing options...
Scott Posted November 2, 2010 Share Posted November 2, 2010 http://h10032.www1.hp.com/ctg/Manual/c00751094.pdf 6000 strip guide Link to comment Share on other sites More sharing options...
RobSheffield Posted November 2, 2010 Share Posted November 2, 2010 Personally i would open it up and give it a good clean Link to comment Share on other sites More sharing options...
jonathanc Posted November 2, 2010 Author Share Posted November 2, 2010 The exact model is the HP Pavillion dv6 2010-sa. Won't stripping it void my warranty? Will definitely have a look at this. I only use my laptop on solid/hard surfaces never in bed but its been left for long period in the kitchen before so might get some oily muck in there... edit: Just had a look at the link Scott gave. Looks pretty easy just have to make sure I don't loose the screws Link to comment Share on other sites More sharing options...
scotty71 Posted November 2, 2010 Share Posted November 2, 2010 Jono...... Car = its only nuts and bolts Laptop = It is only screws. Guide here, piece of piss mate http://www.insidemylaptop.com/take-apart-hp-pavilion-dv6000-laptop/ HP's are known to gather dust/lint and overheat thus shuting down the lappys' Link to comment Share on other sites More sharing options...
jonathanc Posted November 2, 2010 Author Share Posted November 2, 2010 True No harm giving it a good clean... might even upgrade the RAM! I do notice the fan being pretty noisy even after 15 min of use... Link to comment Share on other sites More sharing options...
scotty71 Posted November 2, 2010 Share Posted November 2, 2010 take ya time, gudie has good pics. Just keep all the screws listed for the certain areas and give it a blow out by the fan housing. I bet there will be a clump of dust there Link to comment Share on other sites More sharing options...
Scott Posted November 2, 2010 Share Posted November 2, 2010 take ya time, gudie has good pics. Just keep all the screws listed for the certain areas and give it a blow out by the fan housing. I bet there will be a clump of dust there You mean the guide I already posted Link to comment Share on other sites More sharing options...
DamanC Posted November 3, 2010 Share Posted November 3, 2010 Try a can of compressed air first Link to comment Share on other sites More sharing options...
Recommended Posts
Please sign in to comment
You will be able to leave a comment after signing in
Sign In Now