Branners Posted August 20, 2010 Share Posted August 20, 2010 I love the sound of my blitz Nurspec RX, but I cannot afford a boost controller and I find the car wont boost high enough without one. The Nurspec RX is nearly as quiet as stock, and with both cats in you can hardly hear it. Exhaust DB register So I'm thinking about selling it. It is a cat back exhaust and fits well under the car. A few scuffs on the underside and a large mark on the tailpipe where it rubbed the bumper on the previous car it was on. If you are looking for a quiet exhaust and can either dial in the boost or dont mind sitting at 1bar then this is the one for you. It wont be available until I have the replacement fitted, but that should be in September. I am looking for £375 for it, and I need that much to be able to afford the replacement so wont be dropping the price I'm afraid. Link to comment Share on other sites More sharing options...
JODY T Posted August 20, 2010 Share Posted August 20, 2010 If you like the exhaust then keep it, I bought a profecb for 60 quid on here, easy to fit and works just fine on my VVT.. cheap as chips.. Dont have to spend megga bucks to get some good quality parts just keep the eyes pealed like i do lol Link to comment Share on other sites More sharing options...
Branners Posted August 23, 2010 Author Share Posted August 23, 2010 I have always used the SBC ID and the Powermeter combo so I am saving up for that. I would also need to declare the boost controller so I may as well get the best I can. Anybody else interested in the exhaust? thanks Link to comment Share on other sites More sharing options...
fullthrottle Posted August 24, 2010 Share Posted August 24, 2010 do you have any pictures of where it is marked and can you post? Link to comment Share on other sites More sharing options...
Branners Posted October 20, 2010 Author Share Posted October 20, 2010 I now have this off the car so will give it a clean up this weekend and post some pictures. Link to comment Share on other sites More sharing options...
Branners Posted October 24, 2010 Author Share Posted October 24, 2010 pictures attached close up picture of the centre section with some scrape marks, and the tail pipe with that large mark which has mostly rubbed off. Link to comment Share on other sites More sharing options...
Recommended Posts