Neil-NA Posted January 21, 2010 Share Posted January 21, 2010 Anybody using one of these? I have an NA with standard airbox and Blitz filter, but i have an APR carbon rad plate that i really want to fit, however this will not go on with the standard air box so looking at getting the BMC. Is the car going to suffer with one on? Thanks. Link to comment Share on other sites More sharing options...
tooley Posted January 21, 2010 Share Posted January 21, 2010 how much you want for your blitz panel filter if you do swap Link to comment Share on other sites More sharing options...
Neil-NA Posted January 21, 2010 Author Share Posted January 21, 2010 No idea matey, there only £30 new Link to comment Share on other sites More sharing options...
Jay_vr6 Posted January 21, 2010 Share Posted January 21, 2010 I had a bmc cda on my vr6 corrado, very good pieces of kit and well made. Just buy the correct model and your laughing Its always said that the original box is best but i can't see the cda being any worse, it'll depend on how you route the intake piping though, not sure there is room to run an 80mm tube into the bumper ducts etc Link to comment Share on other sites More sharing options...
Neil-NA Posted January 21, 2010 Author Share Posted January 21, 2010 I would rather keep the standard airbox but there is no way of using the rad plate then. The BMC is as close to an enclosed filter as i can get really, shouldnt be too hard to route a cold air feed to it. I might just give it a go, if it doesnt work i can always change back. Link to comment Share on other sites More sharing options...
Nic Posted January 21, 2010 Share Posted January 21, 2010 I'd personally keep the stock airbox and swap the rad cover for one that will fit. Link to comment Share on other sites More sharing options...
Neil-NA Posted January 21, 2010 Author Share Posted January 21, 2010 I'd personally keep the stock airbox and swap the rad cover for one that will fit. Its a carbon one, cant find any others that will work with the standard airbox, maybe if i'm really careful with a dremel i can cut a bit out Link to comment Share on other sites More sharing options...
w41k3r Posted January 21, 2010 Share Posted January 21, 2010 i had one on my civic coupe thought it was a good product no bad things to say about it, just....... not enough noise for me lol Link to comment Share on other sites More sharing options...
Recommended Posts
Please sign in to comment
You will be able to leave a comment after signing in
Sign In Now