jackso11 Posted January 2, 2010 Share Posted January 2, 2010 I have put ads in the wanted section a few times for these but had no joy so far. Does anyone know who makes/made them? Also, can a few people post pictures of them and how they look around the edges once they are siliconed in place Link to comment Share on other sites More sharing options...
Scott Posted January 2, 2010 Share Posted January 2, 2010 Not sure who owns the moulds now but I'm pretty sure all the ones that were made have been sold, and I can't see a new batch making itself available for a while. The edges is all down to the person who does the work on them. Different people have different ideas on how to do them and what looks best. It is a fairly tricky and fiddly job so be prepared to need lots and lots of time & patience. Link to comment Share on other sites More sharing options...
Steve Posted January 2, 2010 Share Posted January 2, 2010 http://www.mkivsupra.net/vbb/showthread.php?t=162962&highlight=clear+lenses Link to comment Share on other sites More sharing options...
Meko Posted January 2, 2010 Share Posted January 2, 2010 i had one on mine when i bought it. the other one came with the car but it got trashed before i had chance to fit the other and i needed a new passenger headlight, so it got replaced with a standard. When i picked it up the bloke i bought it off said it took him that long to fit the one he never got round to doing the other. It did look good though. Link to comment Share on other sites More sharing options...
jackso11 Posted January 2, 2010 Author Share Posted January 2, 2010 hmmmm....so the mould was sold. Anyone know who bought it? Link to comment Share on other sites More sharing options...
ray007 Posted January 2, 2010 Share Posted January 2, 2010 also intrested if anyone knows where to get them - or maybe we can persuade someone to do them as a group buy? Link to comment Share on other sites More sharing options...
nevins Posted January 2, 2010 Share Posted January 2, 2010 I almost bought those moulds but was out bid buy a pound Link to comment Share on other sites More sharing options...
Nic Posted January 2, 2010 Share Posted January 2, 2010 Ab Flug sell the inner mouldings separately now, so it may be possible to buy just the lenses. http://abflug.jp/products/SUPLA80/manager/upfile/52_144acfcc07e01b.jpg http://img84.imageshack.us/img84/5983/p1030231yf1.jpg Pic of headlights with Ab Flug lenses fitted. Link to comment Share on other sites More sharing options...
jackso11 Posted January 3, 2010 Author Share Posted January 3, 2010 those are nice mouldings. Where can I get them? and who can find out if they do the clear lenses? Link to comment Share on other sites More sharing options...
BJ_dpc Posted January 3, 2010 Share Posted January 3, 2010 Removed by mods - read the rules! Link to comment Share on other sites More sharing options...
jackso11 Posted January 3, 2010 Author Share Posted January 3, 2010 how much will they be? Link to comment Share on other sites More sharing options...
Scott Posted January 3, 2010 Share Posted January 3, 2010 About £350 Link to comment Share on other sites More sharing options...
jackso11 Posted January 3, 2010 Author Share Posted January 3, 2010 ouch Link to comment Share on other sites More sharing options...
jackso11 Posted January 3, 2010 Author Share Posted January 3, 2010 saying that, its cheaper than facelifts....and I think it looks nicer. Where can I get them? Link to comment Share on other sites More sharing options...
Scott Posted January 4, 2010 Share Posted January 4, 2010 That is just for the lenses bud, as in the inserts and the clear lenses. It isn't for a set of lights. Not sure where to get them, last person I knew to supply them was Nic. Link to comment Share on other sites More sharing options...
jackso11 Posted January 4, 2010 Author Share Posted January 4, 2010 yeah but I already have the lights, the inserts and the lenses would be fine to revamp the old ones. Although maybe they need to go on facelift lights as there is no side light hole. Link to comment Share on other sites More sharing options...
jackso11 Posted January 6, 2010 Author Share Posted January 6, 2010 any development on this? Link to comment Share on other sites More sharing options...
suprattgaz Posted February 22, 2010 Share Posted February 22, 2010 I can get another pair of moulds together if someone wants to take on the business - a trades person on here probably?? ie: I can't be bothered with the whole selling lenses and supporting the product again but can easily get another pair of moulds knocked up for a cost. PM me if you are interested in buying a pair of moulds. Gary Link to comment Share on other sites More sharing options...
Recommended Posts
Please sign in to comment
You will be able to leave a comment after signing in
Sign In Now