GlennMR2 Posted April 29, 2005 Share Posted April 29, 2005 this is following on from my other thread (J-Spec Headlights Cleaned) . i went for matt black in the end and kept the chrome rings. have a look at the pics so far Link to comment Share on other sites More sharing options...
Fox Posted April 29, 2005 Share Posted April 29, 2005 looking good. You could try and get a chrome ring made for the larger light!! Link to comment Share on other sites More sharing options...
MONKEYmark Posted April 29, 2005 Share Posted April 29, 2005 do the chrome rings come out or you have to mask them off. i fancy doing that. dont fancy splitting open brand new lights though Link to comment Share on other sites More sharing options...
GlennMR2 Posted April 29, 2005 Author Share Posted April 29, 2005 i had to mask the chrome rings off as for getting 1 made up for the large hole, it would look good but i cant be bothered to do that. lol cheers for your replys Link to comment Share on other sites More sharing options...
kghelmet Posted April 29, 2005 Share Posted April 29, 2005 very nice,my headlights are in the post can i have them back asap Link to comment Share on other sites More sharing options...
Willson Posted April 29, 2005 Share Posted April 29, 2005 Looks sweet, post pics when installed Link to comment Share on other sites More sharing options...
Sharpie Posted April 29, 2005 Share Posted April 29, 2005 nice Link to comment Share on other sites More sharing options...
Guest steve silvester Posted April 29, 2005 Share Posted April 29, 2005 my god there gona look mint, mine are shafted, was quoted £611 to buy new. did you put them in oven, sorry missed first post????????? i need to do this. Link to comment Share on other sites More sharing options...
GlennMR2 Posted April 29, 2005 Author Share Posted April 29, 2005 i made up a heat box to put them in.. heres my other 2 threads http://www.mkivsupra.net/vbb/showthread.php?t=37198&highlight=facelift http://www.mkivsupra.net/vbb/showthread.php?t=37196&highlight=facelift im going to put the passenger side 1 back on then i will take some pics of both sides then you can decide what looks better Link to comment Share on other sites More sharing options...
Guest steve silvester Posted April 29, 2005 Share Posted April 29, 2005 are the lenses plastic or glass?? mine is a 1996 jap spec and has plastic they dont look like those, the chrome has gone brown and come away from the ring, it drives me mad every time i look at it. Link to comment Share on other sites More sharing options...
sooper-supra Posted April 29, 2005 Share Posted April 29, 2005 Sweet look great! Link to comment Share on other sites More sharing options...
GlennMR2 Posted April 29, 2005 Author Share Posted April 29, 2005 they are plastic lenses but scubed up realy well !!! heres a few more pics, there not very good because its to bright outside. i will take some more later when not so bright Link to comment Share on other sites More sharing options...
GlennMR2 Posted April 29, 2005 Author Share Posted April 29, 2005 and a couple more of the other side!!!! Link to comment Share on other sites More sharing options...
imi Posted May 1, 2005 Share Posted May 1, 2005 Im in the process of painting my headlights too. Been polishing the lens using Turtle Wax Safe CUT for both inside & outside.... - Do I need a machine or something to buff the lens to perfection or a simple wipe and polish with a cloth will be sufficient. - What about this Novus and PLexus stuff...is this really required for best results. what about a normal glass cleaner...? I want to them paint the inside BLACK... - Do I use Halfords MATT BLACK UHT (high temp) spray on the inside straight away OR - Do I first need to prime it with Halfords Grey Primer. - whats the best way to MASK both the Chrome rings....? Appreciate all the help I can get as I dont want to put it all together only to rip it to bits again. Link to comment Share on other sites More sharing options...
Jspec Germany Posted August 13, 2005 Share Posted August 13, 2005 Im in the process of painting my headlights too. Been polishing the lens using Turtle Wax Safe CUT for both inside & outside.... - Do I need a machine or something to buff the lens to perfection or a simple wipe and polish with a cloth will be sufficient. - What about this Novus and PLexus stuff...is this really required for best results. what about a normal glass cleaner...? I want to them paint the inside BLACK... - Do I use Halfords MATT BLACK UHT (high temp) spray on the inside straight away OR - Do I first need to prime it with Halfords Grey Primer. - whats the best way to MASK both the Chrome rings....? Appreciate all the help I can get as I dont want to put it all together only to rip it to bits again. I'm doing this next week as well and want to know the process since nobody has spelled it out for guys like me that don't have 20 pound brains. Link to comment Share on other sites More sharing options...
DamanC Posted August 14, 2005 Share Posted August 14, 2005 if it helps i used Turtle Wax Safe CUT and some elbow grease Link to comment Share on other sites More sharing options...
Recommended Posts
Please sign in to comment
You will be able to leave a comment after signing in
Sign In Now