original_amo Posted September 8, 2009 Share Posted September 8, 2009 hi, i'm after a sump drain flange for when you go single turbo. anyone got any ideas or any parts let me know please. thanks amo Link to comment Share on other sites More sharing options...
caseys Posted September 8, 2009 Share Posted September 8, 2009 http://powerhouseracing.com/Templates/frmtemplateM7.asp?SubFolderID=21&SearchYN=N You mean the flange that'll fit on your oil return line from the bottom of the turbo to the sump yes? I have the oil line from the link above the Item PHR Turbo Oil Drain Kit for 1993-98 Supra . Item is one from bottom on that page. But found it wasn't suitable for my turbo (GT35R) and is for any T04-based PHR, WOTM, SP, or HKS single turbo kit. I didn't buy it from PHR directly but an ex club member. Think getting the flange separately cost me about £50 inc the part, shipping + duty... to find it didn't fit my tubby. Otherwise the hose + flanges + bolts are brand new, as said I bought them off a previous club member but cannot return them as sadly they are no longer with us. Let me know if it's suitable to you, I am selling the hose completely as I had another one fabricated for mine. It's a lovely bit of kit and wish I could get it to fit to mine (possibly just need an adapter flange at the turbo side). Link to comment Share on other sites More sharing options...
original_amo Posted September 8, 2009 Author Share Posted September 8, 2009 interested, how much do you want for it? Link to comment Share on other sites More sharing options...
caseys Posted September 8, 2009 Share Posted September 8, 2009 Going by current conversion rates : http://www.xe.com/ucc/convert.cgi?Amount=135&From=USD&To=GBP&x=33&y=16 It's £81 ex delivery + ex duty from H&M Customs (aka b*****ds). I think I am missing the little papery gasket on the right hand side of that picture, I'll have to check I've got the 4 little washers (unless you're not fussed about that). All those little bits can be easily bought from a hardware store though and a little paper gasket cut out (as the one I got shipped was paper-esq and perished/tore slightly when trying to fit it.) Wouldn't think that'd cost you more than £2. £75 inc postage for it. Just to make sure you know it won't connect to a GT35R unless you made some sort of adapter for it, AFAIK it'll only fit the turbos listed there on the PHR website for it (was unfortunately sold it saying it'd fit a GT35R). Link to comment Share on other sites More sharing options...
dude Posted September 8, 2009 Share Posted September 8, 2009 Nice bit of kit this, cheap at that price;) Link to comment Share on other sites More sharing options...
Paul Whiffin Posted September 8, 2009 Share Posted September 8, 2009 I have the flanges in stock if needed. Link to comment Share on other sites More sharing options...
Recommended Posts