JustGav Posted June 13, 2009 Share Posted June 13, 2009 Good grief what a day... Helping Suprash sort out some issues. The plan was to change some brake disks... Just jack it up and take the wheel off I hear, well okay, lets try... Take off the wheel nuts right? Okay, after driving around to find a 27mm socket after buying a 26mm and it not fitting. socket check! Put the socket on the breaker bar and away we go... WRONG.. snapped the breaker...Hmmm.. this could be an issue.. Drive down to a tyre place... 1/2" air gun, nope, no good... okay try another place, BIG 1" drive air gun, spun them off and spun them back on, ALL good Drive back, slacken them off ready to do the work...breaker bar #2 snap....tighten up the remaining ones and then drive back to the tyre place and "Are you sure you did them all, yes mate, can you do them again please", "Aaah, might have forgotten one" AFTER using a 5ft breaker bar.. Drive back home, jack it up, take all the nuts off finally... the rest of it is still a story in the making... Total damage; 2 1/2" breaker bars (24 inch long) and 2 ratchets.... seesh Guess the vehicle PS : Good to meet you Caseys (He popped past and offered some assistance as well ) Link to comment Share on other sites More sharing options...
bignum Posted June 13, 2009 Share Posted June 13, 2009 Sounds like a nitemare, was it some kind of truck, hgv;) Link to comment Share on other sites More sharing options...
Guest Budz86 Posted June 13, 2009 Share Posted June 13, 2009 Focus? Link to comment Share on other sites More sharing options...
Branners Posted June 13, 2009 Share Posted June 13, 2009 large car transporter needed to move an MR2 about? Link to comment Share on other sites More sharing options...
JustGav Posted June 13, 2009 Author Share Posted June 13, 2009 Sounds like a nitemare, was it some kind of truck, hgv;) Focus? Hahahaha, I reckon the 1" airgun used would have flipped a focus over.. large car transporter needed to move an MR2 about? Yup, the Iveco transporter thing of his, which he uses to go to the drift days... Link to comment Share on other sites More sharing options...
caseys Posted June 13, 2009 Share Posted June 13, 2009 Considering I am 15 stone and can bench press 100Kg, leg press over double that I really didn't think that nut was going to shift after trying to apply all my weight or leverage against that damn thing. Was the other side just the same? Next time just wire the truck up to have 100% rear brake bias Then again you'd be kinda drifting on the way to the drift event. Link to comment Share on other sites More sharing options...
Carl_S Posted June 13, 2009 Share Posted June 13, 2009 Dissapointed with the content of this thread... Link to comment Share on other sites More sharing options...
JustGav Posted June 13, 2009 Author Share Posted June 13, 2009 Dissapointed with the content of this thread... It is like a good advert, makes you yearn for the content but then fails to deliver Link to comment Share on other sites More sharing options...
Carl_S Posted June 13, 2009 Share Posted June 13, 2009 You know how to tease a man. Link to comment Share on other sites More sharing options...
Recommended Posts
Please sign in to comment
You will be able to leave a comment after signing in
Sign In Now