alaing Posted April 9, 2009 Share Posted April 9, 2009 Can someone help me? I have had a missfire problem for ages with my car and have replaced all ignition componants with no solve to the problem . Ive just been reading through a few old missfire post and i think i may have my wires into the coilpack connectors round the wrong way as i get a Very weak spark. Can anyone confirm (preferably with a pic) which way round the wires go please? thanks alain:) Link to comment Share on other sites More sharing options...
Rajinder Posted April 9, 2009 Share Posted April 9, 2009 This might help. Link to comment Share on other sites More sharing options...
edge Posted April 9, 2009 Share Posted April 9, 2009 Get the car running and take each connector off one at a time, when you remove one and you find it dont make that much difference to how it runs then swap the wires over on that connector. Link to comment Share on other sites More sharing options...
alaing Posted April 9, 2009 Author Share Posted April 9, 2009 ALL is good again guys Thanks! Had the wires round wrong on 3 cylinders! doh!! Link to comment Share on other sites More sharing options...
Chris Wilson Posted April 9, 2009 Share Posted April 9, 2009 Orange (or is it a brown colour) / black striped wires go to the clip side of the coil pack connectors. Link to comment Share on other sites More sharing options...
alaing Posted April 9, 2009 Author Share Posted April 9, 2009 Cheers Chris all sorted now. Also found some of my wiring was old and brittle to the clips so replaced some of that, something to watch out for perhaps on other peoples cars? Link to comment Share on other sites More sharing options...
Recommended Posts
Please sign in to comment
You will be able to leave a comment after signing in
Sign In Now