AMG Posted March 25, 2005 Share Posted March 25, 2005 Currently trying to change my J-SPec front brakes with UK's but hit a snag. Has anyone got any tips for undoing the two retaining bolts on the back of the caliper? I have tried but cant free them up. Link to comment Share on other sites More sharing options...
mawby Posted March 25, 2005 Share Posted March 25, 2005 I have tried but cant free them up.Try harder. I had to use a piece of pipe to increase the leaverage to get mine off. Link to comment Share on other sites More sharing options...
AMG Posted March 25, 2005 Author Share Posted March 25, 2005 Done them now, well bloody tight. Mind you, better than being loose Link to comment Share on other sites More sharing options...
merckx Posted March 25, 2005 Share Posted March 25, 2005 I know it's too late now, but. Use a blow torch to heat them up a little, be careful where the heat goes though. I did them on my van a few months ago and they were seriously tight. I used a long wrench and I shattered the extension bar, only my full weight would move them. It was the locking compound on the thread which made it so difficult, I used the blow torch to warm the other bolts and they came out so easy! Link to comment Share on other sites More sharing options...
Recommended Posts
Please sign in to comment
You will be able to leave a comment after signing in
Sign In Now