Guest sunnyG83 Posted January 10, 2009 Share Posted January 10, 2009 i have for sale a Mines Auto-ECU for a 2jz-gte. This is currently being run on my Auto-TT. I also understand that this can be used on a Manual-TT also. I am looking for £200 delivered + your standard auto-ecu. I require the standard ECU to replace the mines ECU which is being removed from my car. Removes fuel cut/ speed cut. Raises rev limiter, more agressive map (ignition/timing), ideal for stock/ bpu. Just as a heads up for anyone wanting to buy this, i have been told many times that normal pump fuel (95ron) should not be used with this. I know that most people on here are running higher octane fuel but you never know. Thanks for looking Link to comment Share on other sites More sharing options...
supraturbochris Posted January 10, 2009 Share Posted January 10, 2009 do you notice any gain with this ecu fitted? quite interested Link to comment Share on other sites More sharing options...
Ian Ian Posted January 10, 2009 Share Posted January 10, 2009 Cheers -Ian- Link to comment Share on other sites More sharing options...
Guest sunnyG83 Posted January 12, 2009 Share Posted January 12, 2009 To be honest guys i have no real world answer as in dyno graphs but i must say that it feels like she pulls a bit harder and generally runs a little smoother too. Like i said i cannot prove any of this via graphs but it does feel as though she is performing better. I am trying to generate funds so am going back to stock ecu. Plus if you already have a fcd/sld then you can remove these and sell them as they will no longer be needed. I liked it when i changed from standard. Link to comment Share on other sites More sharing options...
supra steve Posted January 12, 2009 Share Posted January 12, 2009 is this remappable? Link to comment Share on other sites More sharing options...
Guest sunnyG83 Posted January 13, 2009 Share Posted January 13, 2009 Hi i am sure that this is already pre-mapped for 1.1bar. I am un-aware if these can be sent back to Mines to be altered. This is a direct replacement for your standard unit but with the added extra's and the 1.1bar Map so it should be more capable of making your car a little more powerful. Like i said before, i really liked this unit when i bought it and it a nice add-on for the chaps running BPU. i RATE IT ;-) Link to comment Share on other sites More sharing options...
Ian Ian Posted January 13, 2009 Share Posted January 13, 2009 Tempting Cheers -Ian- Link to comment Share on other sites More sharing options...
Guest sunnyG83 Posted January 13, 2009 Share Posted January 13, 2009 Ian your engine bay is pretty bling Link to comment Share on other sites More sharing options...
Ian Ian Posted January 13, 2009 Share Posted January 13, 2009 Ian your engine bay is pretty bling why thankyou kind sir, im tempted in the mines ecu but where are you in lothain i would rather swop at the same time so to speak Cheers -Ian- Link to comment Share on other sites More sharing options...
Guest sunnyG83 Posted January 14, 2009 Share Posted January 14, 2009 Hey Ian i am in East Lothian right next to Berwick-upon-tweed Link to comment Share on other sites More sharing options...
Recommended Posts