C33JAY Posted March 23, 2005 Share Posted March 23, 2005 Dont beat me up over this but what is the small resevoir in front of the Rad with 2 x pipes leading to it and a Gray Plastic cap with an H on it, is this something to do with the Air Con ? And what should it look like through the small round viewing window ? Thanks and I have looked around a lot on the Forum but not found anything similar hence the question CJ Link to comment Share on other sites More sharing options...
Ian C Posted March 24, 2005 Share Posted March 24, 2005 It's the high pressure side of the aircon system I think it shouldn't be bubbly and that's about it. -Ian Link to comment Share on other sites More sharing options...
C33JAY Posted March 24, 2005 Author Share Posted March 24, 2005 Thanks for the reply :o) Link to comment Share on other sites More sharing options...
normore1 Posted March 24, 2005 Share Posted March 24, 2005 It's the dryer for the Air conditioning. With the A/C on it should be clear with only a few small bubbles. If it is cloudy, the system is likely low on R-32 refrigerant. Normal operation is that it will show some bubbles upon start up of the A/C the clear within about a minute. To test turn the climate control to auto and the temperature to lowest setting. As Ian says the grey cap covers the high pressure side valve. This is used for checking the A/C system pressures. If I recall correctly the high pressure side should normally be about 200-250 psi and the low side is 25-45 psi depending on ambient temperature and RPM. Sight bubble is actually very good at determining the status of the A/C fill. Link to comment Share on other sites More sharing options...
C33JAY Posted March 24, 2005 Author Share Posted March 24, 2005 Thanks for taking the time to provide me with so much info !! much appreciated will go an do my checks now Best Rgds Chris Link to comment Share on other sites More sharing options...
Recommended Posts
Please sign in to comment
You will be able to leave a comment after signing in
Sign In Now