Luka-P Posted January 2, 2009 Share Posted January 2, 2009 I'm having a few concerns about firing the car up for the first time. I'm not sure if it's just me trying to find excuses or I'm taking added precautions? I turned the ignition on and found that no dash lights appeared. I'm getting the MIL light and also the handbrake light but nothing else. The odometer lights up and so do the lights below it but I get nothing from the right hand side i.e. oil lights etc or the slip control lights on the speedo. I'd like to get it all working and working right before I turn the key! Thanks, Luke. Link to comment Share on other sites More sharing options...
Scooter Posted January 2, 2009 Share Posted January 2, 2009 (edited) http://www.mkivsupra.net/vbb/showthread.php?t=115407&highlight=dry+solder but as they are all out it could be the main connection plug? Edited January 2, 2009 by Scooter (see edit history) Link to comment Share on other sites More sharing options...
Scooter Posted January 2, 2009 Share Posted January 2, 2009 http://www.mkivsupra.net/vbb/showthread.php?t=99815&highlight=oil+lights PM edge! Link to comment Share on other sites More sharing options...
Tricky-Ricky Posted January 2, 2009 Share Posted January 2, 2009 I always run an oil pressure gauge, and pull the fuses to prime the oil pressure first. Link to comment Share on other sites More sharing options...
Luka-P Posted January 2, 2009 Author Share Posted January 2, 2009 Found out it was the orange connecter from the wire harness by the ECU, lever hadn't been pulled down to lock it in place. Link to comment Share on other sites More sharing options...
Recommended Posts
Please sign in to comment
You will be able to leave a comment after signing in
Sign In Now