Dazzi Posted December 16, 2008 Share Posted December 16, 2008 SOLD Material Polished SUS 304 Stainless Steel Size Outlet is 76mm (3") pipe 2-1 Section is 70mm (2.75") pipe 3-1 Section is 43mm (1.75") pipe I bought a previous manifold from this company and ran into a bit of trouble. I contacted them and they sent me and 'updated' version addressing the problems I experienced. On the old one the steering rack was fine, the 02 sensors were fine, it was the holes that fit on the engine studs that needed cutting about 5mm wider, also the old one slightly touched the engine mount but I've heard people either cut the engine mount abit or dent the part of the manifold that touches or putting a few gaskets on. It only touches a little but leaves a 1-2mm gap between the manifold and the exhaust head. As I said this new one they sent looks a lot better fit and feels like they have moved that part of the manifold back. Im selling as I just don't have the time to fit it as my car is a daily driver so standing outside the night before trying to fit this is out of the question. I am selling this for 175 quid + 15 quid postage. They cost 198 quid plus postage from China! This item is brand new and I must make it clear that some minor work may need doing like other stainless manifold... so just letting you know. New manifold pics: Also if anyone wants to try a go with the old manifold im selling this for 50 quid + 15 quid postage! Old manifold pics: Any questions, please ask! Link to comment Share on other sites More sharing options...
barneybrendan Posted December 16, 2008 Share Posted December 16, 2008 pm`d Link to comment Share on other sites More sharing options...
JamesF Posted December 16, 2008 Share Posted December 16, 2008 Possibly interested in the old one Link to comment Share on other sites More sharing options...
Dazzi Posted December 16, 2008 Author Share Posted December 16, 2008 Deposit taken for both Link to comment Share on other sites More sharing options...
JamesF Posted December 16, 2008 Share Posted December 16, 2008 D'oh! Link to comment Share on other sites More sharing options...
Recommended Posts