Guest daz 6576 Posted December 8, 2008 Share Posted December 8, 2008 my auto box is behaving funny. it goes from 1st gear straight into 4th gear. does anyone know what this might be or how to fix it and the overdrive does not do anything either when you press it Link to comment Share on other sites More sharing options...
BOB B Posted December 8, 2008 Share Posted December 8, 2008 Hi. I have never had a problem like that Im afraid but have you tried it in manuel mode? will it go through 1st, 2nd, 3rd ok in manuel? Bob. Link to comment Share on other sites More sharing options...
supra matt Posted December 8, 2008 Share Posted December 8, 2008 check you oil mate and is the car stock? Link to comment Share on other sites More sharing options...
Guest daz 6576 Posted December 8, 2008 Share Posted December 8, 2008 the oil is fine and the car is not stock single turbo, Link to comment Share on other sites More sharing options...
RobSheffield Posted December 8, 2008 Share Posted December 8, 2008 What spec running what ecu? Just developed or been happening a while? Come on, help us to help... Link to comment Share on other sites More sharing options...
Guest daz 6576 Posted December 8, 2008 Share Posted December 8, 2008 its a link ecu and im still in the stage of running the engine in, could it be the way it has been mapped. the revs limit at 4000 and it has been set like that on purpose by the mapper whilst running in the engine Link to comment Share on other sites More sharing options...
RobSheffield Posted December 8, 2008 Share Posted December 8, 2008 How many times have you launched it and what temp did the box reach if you did? Link to comment Share on other sites More sharing options...
Guest daz 6576 Posted December 8, 2008 Share Posted December 8, 2008 it hasnt been launched, it has been driven very slowly since ive had it back. as for the temp of the box i dont know Link to comment Share on other sites More sharing options...
supra matt Posted December 8, 2008 Share Posted December 8, 2008 the link is a piggy back right? who is maping the car? Link to comment Share on other sites More sharing options...
Dave17 Posted December 8, 2008 Share Posted December 8, 2008 I'm stunned it doesn't stall all the time going from 1st to 4th Link to comment Share on other sites More sharing options...
Guest daz 6576 Posted December 9, 2008 Share Posted December 9, 2008 full stand alone unit the ecu and no it doesnt stall Link to comment Share on other sites More sharing options...
michel lane Posted December 9, 2008 Share Posted December 9, 2008 talk to the installers and get them to setup the map correctly for the auto transmission, otherwise it looks like your box is broken Link to comment Share on other sites More sharing options...
Guest daz 6576 Posted December 11, 2008 Share Posted December 11, 2008 is now fixed it was a lose wire from the auto ecu which caused it not to change gear fixed woo hoo Link to comment Share on other sites More sharing options...
Recommended Posts
Please sign in to comment
You will be able to leave a comment after signing in
Sign In Now