Scott Posted August 29, 2008 Share Posted August 29, 2008 Hey folks, got an RSR exhaust today and it has the baffle in it. I've undone the nut etc but can't pull the damn thing out. Is there a knack to it? I don't want to damage it. Cheers Link to comment Share on other sites More sharing options...
gordy07 Posted August 29, 2008 Share Posted August 29, 2008 How is it scotster my missus is getting me one for xmas Link to comment Share on other sites More sharing options...
Dazzi Posted August 29, 2008 Share Posted August 29, 2008 Pliers to pull it out? Thats how I got mine out. Link to comment Share on other sites More sharing options...
TRD DAN Posted August 29, 2008 Share Posted August 29, 2008 put it on a rev her up lol , thats how we got my pals out . Link to comment Share on other sites More sharing options...
Scott Posted August 29, 2008 Author Share Posted August 29, 2008 How is it scotster my missus is getting me one for xmas No idea yet buddy but i'll tell you, it looks the bloody part Pliers to pull it out? Thats how I got mine out. Not got anything i can grab onto unfortunately. put it on a rev her up lol , thats how we got my pals out . Best reply yet hehehehehe. If all else fails i'm guessing that will be my last hope. Link to comment Share on other sites More sharing options...
Homer Posted August 29, 2008 Share Posted August 29, 2008 haha, the old stuck RSR baffle never fails to cause problems Is this an exhuast where the baffles not been out before? Everyone thats had one of these has had trouble getting it out the first time, they are VERY firmly wedged in. The only real way of doing it is to remove the back box, push a large block of wood down it from the other end and bash it out with a mallet. Most have had to then grind the edges of the baffle down a little to get it to go back in easily again. Link to comment Share on other sites More sharing options...
Scott Posted August 29, 2008 Author Share Posted August 29, 2008 haha, the old stuck RSR baffle never fails to cause problems Is this an exhuast where the baffles not been out before? Everyone thats had one of these has had trouble getting it out the first time, they are VERY firmly wedged in. The only real way of doing it is to remove the back box, push a large block of wood down it from the other end and bash it out with a mallet. Most have had to then grind the edges of the baffle down a little to get it to go back in easily again. Oh goody, no idea if its been out before as i bought it from knightrider. I'm thinking about pliars that i could use in reverse to grip the small bore. If all else fails though i'll just take it to bits. Good job it aint on the car i guess. Link to comment Share on other sites More sharing options...
gordy07 Posted August 29, 2008 Share Posted August 29, 2008 Good luck mate homers idea with the bit of wood sounds a good call,the pliers could damage it Link to comment Share on other sites More sharing options...
Homer Posted August 29, 2008 Share Posted August 29, 2008 If it's never been out before then the pliers will not work, it need a LOT of force to remove. However if it's from Stuart's car it has definetly been removed, so you might be okay. You won't damage it with pliers, the baffle is extremely stong on the RSR. Link to comment Share on other sites More sharing options...
JohnHandy Posted August 30, 2008 Share Posted August 30, 2008 I got mine out with long pice of metal with hook on the end....pass it through the middel and hook it round the back edge of the baffel in the box and pull it out easy. Link to comment Share on other sites More sharing options...
MARCUS1979 Posted August 30, 2008 Share Posted August 30, 2008 I got mine out with long pice of metal with hook on the end....pass it through the middel and hook it round the back edge of the baffel in the box and pull it out easy. Thats how i did mine in the end and have now grinded it down a bit so its now so much easier Link to comment Share on other sites More sharing options...
MarkR Posted August 30, 2008 Share Posted August 30, 2008 I test fitted mine before installing all the way and realised it was a bit small so ground it down slightly. Obviously not enough as the first time it still stuck, but I managed to pull it out by jamming a big hammer handle into it and wiggling it out... Link to comment Share on other sites More sharing options...
Recommended Posts
Please sign in to comment
You will be able to leave a comment after signing in
Sign In Now