razza Posted May 13, 2008 Share Posted May 13, 2008 I seemed to have a couple missing. I'm after the ones with washers on that go at the front of the undertray, linking it to the smaller undertray under the front bumper and the car. Without them the tray's hanging down a bit. Thanks. Link to comment Share on other sites More sharing options...
razza Posted May 14, 2008 Author Share Posted May 14, 2008 all sorted now:) Link to comment Share on other sites More sharing options...
MRX Posted May 14, 2008 Share Posted May 14, 2008 Could use a set myself, they all snapped off when I took the tray off... bloody rust Link to comment Share on other sites More sharing options...
razza Posted May 14, 2008 Author Share Posted May 14, 2008 you may have to drill them out if they've snapped then, not a fun job, mine were just missing luckily so didn't have to do that. Link to comment Share on other sites More sharing options...
MRX Posted May 14, 2008 Share Posted May 14, 2008 Did you buy new ones? if so where from? Link to comment Share on other sites More sharing options...
razza Posted May 14, 2008 Author Share Posted May 14, 2008 sorry no, had a little help from ToyotaGT:) Link to comment Share on other sites More sharing options...
Kev.O Posted May 14, 2008 Share Posted May 14, 2008 Did you buy new ones? if so where from? Which ones do you need as there are three types of screws/bolts from memory. I'll write down the part numbers and a description of what each one is and let you decide form there Link to comment Share on other sites More sharing options...
MRX Posted May 14, 2008 Share Posted May 14, 2008 hmmm, they were the ones right at the front. Link to comment Share on other sites More sharing options...
MRX Posted May 14, 2008 Share Posted May 14, 2008 There only seems to be about 6 or 7 common type bolts/screws used all over the place (i'm sure someone will correct me). Would be cool to be able to just buy a large bag of common screws and bolts and just replace them as they are removed on different projects. Link to comment Share on other sites More sharing options...
Kev.O Posted May 14, 2008 Share Posted May 14, 2008 I have two numbers, the first one is 90119-06361 (Bolt W/Washer) and the bolt length is 16mm overall. The other number is 90119-06355 (Bolt W/Washer) and the bolt length is 24mm overall. I don't have my tray fitted at the moment so maybe someone will be kind enough to tell you which length you need. Link to comment Share on other sites More sharing options...
Kev.O Posted May 14, 2008 Share Posted May 14, 2008 Both the above bolts have quite large washers. I also have the following part number 90159-50311 (Screw W/Washer). This seems a common screw with a smaller washer that is used around the front wheel arch area. Link to comment Share on other sites More sharing options...
Recommended Posts