jevansio Posted March 8, 2008 Share Posted March 8, 2008 One of 2 jobs I've just had completed on the car is a new exhaust setup. Basically the car was too loud to get on most UK tracks, so I went to a cracking place in Newcastle called AAS (Advanced Automotive Systems) to see the guys up there to see what they could do. The car was measured at 108db when in went in @ 5000rpm. They've made a new backbox setup, it's much longer but maintains the 4" pipework from the HKS Ti Racing. The backbox has been made with a flange so that if I ever wanted to put the titanium tip back on it's an easy swap (they've altered my HKS tip with the same flange). With this in place it's come out at 100db @ 5000rpm. They've also put a 4" electronically controlled valve in the system, the controller is in the centre arm rest box and I just flick a switch either way to open or close the valve. Videos: This is a video of the valve in action from inside the car, Right Click here and Save Target As to download the better quality MP4 version, or click here for the YouTube version. It's a bit hard to get across just how quiet it makes it with the crappy microphone but the video gives you an idea. It starts off quiet, then at about 20 second starts to get loud, 30 seconds quite again. I then blip the throttle on quite, then loud, then back to quite at the end. You can tell when it goes loud as the microphone on the camera starts to break up. Here are some pics of it from outside, I asked Stu to try and replicate the HKS / Jap style as close as he can & I love the finished product. So massive thanks to Stu & Alister @ AAS, I can highly recommend their work, if you're in need of any exhaust / pipework type stuff in the North East, give them a call. Link to comment Share on other sites More sharing options...
Trig Posted March 8, 2008 Share Posted March 8, 2008 very nice mate!!, love the dash setup too Link to comment Share on other sites More sharing options...
jevansio Posted March 8, 2008 Author Share Posted March 8, 2008 very nice mate!!, love the dash setup too Cheers , watch out for my next thread for some more trick interior stuff Link to comment Share on other sites More sharing options...
simbasupra Posted March 8, 2008 Share Posted March 8, 2008 Very nice mate, like trig said loving the gauges. Not sure if it was you, but can remember a post before saying they were going to do this. For the electronic control thing you didn't use a apexi gizmo did you? what did you use? Link to comment Share on other sites More sharing options...
jevansio Posted March 8, 2008 Author Share Posted March 8, 2008 Very nice mate, like trig said loving the gauges. Not sure if it was you, but can remember a post before saying they were going to do this. For the electronic control thing you didn't use a apexi gizmo did you? what did you use? Many thanks It wasn't an Apexi, it was a QuickTime Performance valve, I'll dig out the link for you, I think Paul Mac posted it. Found it here Link to comment Share on other sites More sharing options...
gaz1 Posted March 8, 2008 Share Posted March 8, 2008 i am going to call you mr gadget from now on:D oh by the way your tyres are getting low on tread:p Link to comment Share on other sites More sharing options...
jevansio Posted March 8, 2008 Author Share Posted March 8, 2008 i am going to call you mr gadget from now on:D oh by the way your tyres are getting low on tread:p Da da da da da da go go gadget exhaust Most of my tread is lying round dyno cells Link to comment Share on other sites More sharing options...
supra_si Posted March 21, 2008 Share Posted March 21, 2008 Spot on i was wondering if anyone on here had been to aas. its not far from me so may take a trip down and see what they can do for me. what are their prices like? Link to comment Share on other sites More sharing options...
paul mac Posted March 21, 2008 Share Posted March 21, 2008 Many thanks It wasn't an Apexi, it was a QuickTime Performance valve, I'll dig out the link for you, I think Paul Mac posted it. Found it here glad you have had a result with this mate, mine is sitting in the garage waiting to be fitted, did you get it with the LED position indicator as they didn't have any in stock when i got mine, the one thing i think peeps need to be carefull of is the quicktime is different from the apexi in that it is total closure and designed to re-route the entire exhaust flow through a dump tube arrangement, it will need a couple of holes drilling in the butterfly to let a small amount of flow like the apexi, any pics of the valve install and the in car controller Link to comment Share on other sites More sharing options...
mr keef Posted March 21, 2008 Share Posted March 21, 2008 Nice one mate..yea iv used them quite a bit in the past AAS they really do know there stuff. Link to comment Share on other sites More sharing options...
simbasupra Posted March 21, 2008 Share Posted March 21, 2008 glad you have had a result with this mate, mine is sitting in the garage waiting to be fitted, did you get it with the LED position indicator as they didn't have any in stock when i got mine, the one thing i think peeps need to be carefull of is the quicktime is different from the apexi in that it is total closure and designed to re-route the entire exhaust flow through a dump tube arrangement, it will need a couple of holes drilling in the butterfly to let a small amount of flow like the apexi, any pics of the valve install and the in car controller Does that mean that the apexi cannot possibly do any harm as even if closed will let through some exhaust gases? Link to comment Share on other sites More sharing options...
p3te Posted March 21, 2008 Share Posted March 21, 2008 Spot on i was wondering if anyone on here had been to aas. its not far from me so may take a trip down and see what they can do for me. what are their prices like? AAS Have my car at the mo, it went in to check my diff which is now going to be replaced, their prices seem very reasonable as well. Link to comment Share on other sites More sharing options...
paul mac Posted March 21, 2008 Share Posted March 21, 2008 Does that mean that the apexi cannot possibly do any harm as even if closed will let through some exhaust gases? as long as you are sensible with it (i.e dont try hitting 1 bar boost with it closed) it will have no detriment at all, when i had mine on i found it increased low down torque as well, the reason i went for the quicktime that Jevansio has over the apexi is its electronic, my plan was to link it to the ecu and make it an automatic system Link to comment Share on other sites More sharing options...
jevansio Posted March 21, 2008 Author Share Posted March 21, 2008 glad you have had a result with this mate, mine is sitting in the garage waiting to be fitted, did you get it with the LED position indicator as they didn't have any in stock when i got mine, the one thing i think peeps need to be carefull of is the quicktime is different from the apexi in that it is total closure and designed to re-route the entire exhaust flow through a dump tube arrangement, it will need a couple of holes drilling in the butterfly to let a small amount of flow like the apexi, any pics of the valve install and the in car controller Cheers Paul, I just went with the basic in car controller (not the fancy one where you can set it to predetermined levels). Stu told me not to run it totally closed, he said it would be fine for a couple of seconds on idle, but not to leave it totally closed, I thought about drilling holes in it, might do that next time it's off. I'll get some pics of the incar setup in a bit. Link to comment Share on other sites More sharing options...
paul mac Posted March 21, 2008 Share Posted March 21, 2008 Cheers Paul, I just went with the basic in car controller (not the fancy one where you can set it to predetermined levels). Stu told me not to run it totally closed, he said it would be fine for a couple of seconds on idle, but not to leave it totally closed, I thought about drilling holes in it, might do that next time it's off. I'll get some pics of the incar setup in a bit. nice one, i am a gadget fan (can you have enough gadgets )so will defo get the position controller but they were out of stock till June !, i think it was about $120 so peanuts really, i will try and remember my remedial maths (or get my 11 year old daughter to do it:d) and measure the open area of the apexi and get some hole sizes to suit for the quicktime Link to comment Share on other sites More sharing options...
jevansio Posted March 21, 2008 Author Share Posted March 21, 2008 nice one, i am a gadget fan (can you have enough gadgets )so will defo get the position controller but they were out of stock till June !, i think it was about $120 so peanuts really, i will try and remember my remedial maths (or get my 11 year old daughter to do it:d) and measure the open area of the apexi and get some hole sizes to suit for the quicktime Thanks I'd appreciate that Link to comment Share on other sites More sharing options...
AndyT Posted March 21, 2008 Share Posted March 21, 2008 Nice one mate..yea iv used them quite a bit in the past AAS they really do know there stuff. Would do a link or info please bud. Mate in the NE just got himself a new toy, ie RX8 and I'm passing on details of the good people in the area. Envy etc. Google doesn't bring up much. Ta in advance. Andy Sorry about the mini hijack J Link to comment Share on other sites More sharing options...
jevansio Posted March 21, 2008 Author Share Posted March 21, 2008 Don't know if they've got a webiste Andy, ask for Stu or Alister Advanced Automotive Systems Unit 19, Bells Close Industrial Estate, Newcastle Upon Tyne, Tyne and Wear NE15 6UG Tel: 0191 267 3718 Link to comment Share on other sites More sharing options...
AndyT Posted March 21, 2008 Share Posted March 21, 2008 Thanks J. Will pass that along. Link to comment Share on other sites More sharing options...
AgtX80 Posted March 21, 2008 Share Posted March 21, 2008 I looked at a skyline a while ago with a system like that, but it had a dodgy handle thing you pull to make it go quiet by the center console. The electronic thing sounds more like it Link to comment Share on other sites More sharing options...
Recommended Posts
Please sign in to comment
You will be able to leave a comment after signing in
Sign In Now