Daston Posted February 21, 2008 Share Posted February 21, 2008 Hi guys As the exterior nears it end I am starting to think about the interior gauges, now I would like it to have a modern feel and possibly have digital dials. However I can not seem to find any I like. I would like an almost TVR type dash with needles and a digital display. The only ones I have seen are fully digital although this is the best I have seen http://www.envyperformance.com/index.cfm?fuseaction=product.display&Product_ID=8031 bet it costs a bomb tho. I also quite like these http://www.dakotadigital.com/index.cfm/page/ptype=product/product_id=313/category_id=253/home_id=59/mode=prod/prd313.htm but unsure with just the numeric rev counter (quite like the curve on the Motec one). Anyone know of anywhere else I could try? Link to comment Share on other sites More sharing options...
marbleapple Posted February 21, 2008 Share Posted February 21, 2008 I don't have an answer to your question mate but FYI there is a issue in March redline Mag which is testing the accuracy of numerous interior gauges. None are digital but the brand names might give you a place to start. Link to comment Share on other sites More sharing options...
marc_p Posted February 21, 2008 Share Posted February 21, 2008 Loving the Dakota ones!! Link to comment Share on other sites More sharing options...
JustGav Posted February 21, 2008 Share Posted February 21, 2008 I know I rabbit on about them, but what about the PLX option? http://www.plxdevices.com Link to comment Share on other sites More sharing options...
Gaz Walker Posted February 21, 2008 Share Posted February 21, 2008 The PLX stuff would rock Link to comment Share on other sites More sharing options...
gaijin Posted February 21, 2008 Share Posted February 21, 2008 SPA gauges are digital;also the Stack system Link to comment Share on other sites More sharing options...
Daston Posted February 21, 2008 Author Share Posted February 21, 2008 Ohhh loving the PLX stuff!! Would it be ok to use them to replace the OEM gauges? Link to comment Share on other sites More sharing options...
Gaz Walker Posted February 21, 2008 Share Posted February 21, 2008 Ohhh loving the PLX stuff!! Would it be ok to use them to replace the OEM gauges? Yep, just make sure you the relevant gauges for an MOT test Gaz. Link to comment Share on other sites More sharing options...
Daston Posted February 21, 2008 Author Share Posted February 21, 2008 Gaz would you guys be able to wire something like that up? Link to comment Share on other sites More sharing options...
Gaz Walker Posted February 22, 2008 Share Posted February 22, 2008 Gaz would you guys be able to wire something like that up? I am sure we could yep. Link to comment Share on other sites More sharing options...
Daston Posted February 22, 2008 Author Share Posted February 22, 2008 cool will be looking into them then Link to comment Share on other sites More sharing options...
Recommended Posts
Please sign in to comment
You will be able to leave a comment after signing in
Sign In Now