theredone
-
Posts
169 -
Joined
Content Type
Profiles
Forums
Store
Blogs
Events
Downloads
Supra Articles
Gallery
Everything posted by theredone
-
I'm looking to use an-10 lines to my catch can with two fittings one from the left cam cover and one from the right cam cover of my 1.5jz build would this be okay or does it need to breath?
-
I have fitted a walbro 255 is the 12v mod needed for around 600 hp Or would it be okay without doing so?
-
Does anybody know the size of the thread which bolts the cam belt tensioner pulley to the 2jzge block?
-
I'm looking to convert my 2jzge to coil packs Could anyone help me find the parts needed And have a wiring diagram for wiring it all in Thanks in advance
-
Okay I'll be buying bigger injectors and thanks for the heads up!
-
What's the best decision for fuel a fuel pump to hit 600hp Using 700cc injectors? Reasonable price to
-
What is needed for a r154 conversion and rough price for the lot I'm currently using a w58 and would any parts I currently have work with a r154
-
anybody??
-
Is the 1jzgte inlet manifold bolt position for the manifold to the lower runner the same as a 2jzge?
-
Is this the correct way to plumb in a external wastegate using a electronic boost controller
-
It's strange because it's as if tial never made a 54mm but that's the measurements my wastegate has
-
I have recently purchased a tial 54mm wastegate And I'm struggling to find a pressure springs I'm looking for a spring rated at around 0.5 bar I've measure the internal diameter of the bottom v band flange and it's measures 2.125" in metric terms 53.975mm Is this the correct place to measure?
-
okay dude have you any photos?
-
the link isnt working for some reason
-
Does anybody know where I can get hold of a decent valve spring removing tool and re-fitting tool
-
if martin p cant sort me one out with is friend then ill order that and try it. thanks for the help
-
-
think i could do with one of these haha
-
its got a standard usb port on the emanage but ive looked over the internet and most people have said that a standard usb cable doesnt work
-
yeah i have the blue its currently not connected to the car but i wanted to get the bits together ready
-
its really confusing because ive seen various forums that state 3 different types of cables 9 pin to usb standard usb to usb usb type a to type b which is a printer cable but most people on the forums have different views saying that the cables dont work :/
-
what cable is needed to connect a emanage blue to a laptop?
-
I'm converting my n/a to coil packs and would like to know if I need to change to a 2jzgte ecu as I have a greddy emanage blue and would this run the coil packs ? So the gte ecu isn't needed?
-
Does anyone have the emanage blue software they could copy for me or a spare software cd for sale?
-
Does anybody know if 2jzgte cam pulleys are the same as the 2jzge ones?
