manolaq

Hello I am interested for the airbag if Ric didn't take it.

PMd

Thanks. You polished them on the car or on a bench? Do you have any photos of the result? - - - Updated - - - Thank you

I used 800,1200,2000 water grit and then a Rotary Foam Pad with Mirka Polarshine T10 (if I remember well). I can have a look and get you some pictures of the tools if you want.

I guess we have to live with that then ...

Thanks mate. I haven't seen the film to be honest. How long they will last taking in consideration that in summer there might be 40 degrees on them?

Thanks mate. The reason I didn't open the headlights and change them to black is because I have plans to get a pair of facelift ones in the near future.

I sprayed the left headlight with clear lacquer but it was a total fail. I ended up removing the lacquer and polishing again.

Hello guys, I decided to restore my headlights and I would like to share my results with you. The results exceeded my expectations to be honest... This is how they looked before. I used 800 grit, then 1200 and at the end 2000. Movement left to right and up to down. This is how they looked after this process. Then I used polishing compound to polish the headlights. This is the final result I have ordered UV protection film to protect them, until I get my facelift ones.

Thanks Jim. Looks similar but it isn't. I sent her a message in instagram.

Hello I am looking for this lip. Has anyone seen it? Do you know the brand? Thanks

Thanks guys. I am not an electronic expert but as far as I know on a pcb in general the capacitors is the first thing to replace if something is not working and if the problem continues then buy another one and as you said these are 23 years old and if you buy a used one it may have problem also.