molak
-
Posts
220 -
Joined
Content Type
Profiles
Forums
Store
Blogs
Events
Downloads
Supra Articles
Gallery
Everything posted by molak
-
sounds promising dude, ive just had car resprayed and inner arches have been taken out il go and have a look
-
it turns over as normal just doesnt fire! ive run a few more earths to test if there is an earthing problem but all is good. do ecu's need resetting? and does a n/a engine have a crankshaft sensor(engine speed sensor)?
-
just put engine back in supra after rebuild but it wont start! its a non turbo engine and ive checked everything about 3 times now! its getting a spark and fuel in the rail but no fuel in the clinders but have no idea why. any ideas?
-
21 sz manual in pearl white!
-
a few months ago i decided to get the supra re-sprayed as some muppet had done a bad paint job on the bumpers and some of the panels and being red it didnt look to good! i removed the engine and stripped most of the car! and now the car is pearl white! will get some pics up soon if i can. its not finished yet but its nearly there........
-
cam cover 5-6nm. inlet wont need a torque just do it tight but dont swing of it!
-
yea should go straight on. ive got one on my n/a engine
-
i no its got 2 manifolds and cats so obviously replace the lot with something like wat nic has. does any1 no were i can get 1?
-
hi, does anybody no were i can get a decat/manifold from for a 95n/a manual
-
immobiliser?
-
nic, or anybody else! were do i get one of these manifolds from? im gonna be puttin my n/a engine back in in a couple of weeks and needs a new manifold!
-
hi, im in the process of re-building my NA engine. does any1 no how tight the cam shaft caps should be and any other torques i should no?? and is there anything else i should be aware of?
-
my bottom pulley has done the same, it splits from the rubber vibration damper in the middle. i got new pulley from ebay for £30 light weight one!