thanks for the chance!! so far i have mine rear shocks to -15mm,-30,-45!!
you can go more but i use 19" wheels so a set mine to -30mm!!
u will still have the same quality that you had before because you are not cutting nothing!!
i will do a write up for all of you!! please say what you think!!
1st you take your shocks out and by compressing the spring take them apart!!
2nd: you have a ring on the shocks were the spring sits!! right?
turn the shock around so its facing the ground and slowly with a hammer push the ring
down about 1.5"!!!
if you are going to do this you will see that u have like a "clip" on the yellow part of the shock!!
3 step: you take your shocks to a manual turner and do external groves with 1.5mm thinck and only go 0.5mm deap!!
You can space the groves like me!! from the original one i did 15mm and all 3 equal!!
so i have from std -15mm, -30mm,-45mm!!
finally you take the "clip" and move it to were you want!! them slowly you push back the ring were the spring goes!! MAKE sure the clip is in the ring so it wont came out!!
fit your std springs back on and mount your suspension again!!
Result: you have your car low, or very low and still runing with stock suspension!!
If the japaneses did it 15 years ago and their still in our car it is safe!!
I hope you all understand, my englis is not very good!!
i will post pics of everything that im doing!!
oh, and if you want or std setup just take the wheels of compresses the spring and put the "clip" back to orignal grove and voila!!
Cheers
Danny