guye_d

bump

Hi Guys, Any advice on where I could find the above? Thanks

Hi Guys, Would be grateful for some recommendations on a suitable clutch for a daily driven T61 (soon to be t67dbb) 6spd. Thanks Dudley

That's the thing guys, its actually the frame and not replaceable parts that have the unsightly damage. An example would be the area where the fender bolts above the wheel well.

I own a 98 vvt-i single T61 supra. The Spec looks something like this: Percision T61 Fluidine Rad Blitz 4" FMIC Sard 650cc Injectors Aeromotive FPR Meth/Water Injection E-manage Ultimate Zeitronix Wideband DVD ICE Greddy Shift Knob Sparco Steering Wheel Guage Panel to replace Passenger airbags TEIN Super Street Coilovers TRD Sway Bars Cusco sway Bars Blitz NUR Spec Wings West Front Lip 18" Staggered wheels Slotted Rotors + HAWK Pads HID kits - dim + full beam N e ways .... I think you get the picture ... It has a significant amount of Mods Now ... Before I did most of these mods ... the car got hit by a drunken fool on the right front and suffered some structural damage. I had the car repaired, all with new parts; however now I am beginning to see some stress cracks on the frame, also there are various things from the repair that I do not like to see and hence I would like to get it changed. So ... here's my difficulty, I am not gonna get someone to give me the money I want due to damage from the accident and therefore I am considering a few options: - Purchasing and N/A manual and swapping in all my goodies. How difficult is this? I would like to get a clean TT and just swap the necessary, but with a local 140% import duty, buying another TT is not a move I really want to make financially. - Just letting go of the car and cutting my losses - Put up with it and shut up Any advice would be appreciated. Thanks Guys

Ultimate

Hi, I'm trying to hook up my zeitronix wideband to the emanage. I have a 2009 model which based on the link below has the Linear Wideband Output and the Nonlinear Wideband Output, which follows a natural output curve of Bosch LSU wideband O2 sensor. http://www.zeitronix.com/Products/zt2/widebandoutput.htm The wire which gives a linear wideband output is currently going to the stock ecu to give a narrowband signal. I therefore need to get the emanage to accept the Non-Linear input; any advice on how to get this done?

Hey Guys, Finally have my emanage ultimate up and running nicely on the vvt-i single. Just one question and I should be good to go. I would like to verify that i have knock setup correctly. Currently I have it tapped to the intake temp sensor to read knock. I noticed recently that Greddy sells a Knock sensor adapter which is recommended for the T-17 harness which is the vehicle specific harness for the vvt-i supra. Is there any merit to purchasing this? Does it add any value over just tapping? Thanks Dudley

Thanks Mate

Anyone know where i can find a manual which shows the directions for a clutch install. Thanks

The Particular Kit I am looking at: http://www.horsepowerfreaks.com/partdetails/SPEC/Clutch/Clutch_Kits/Twin_Disc/11150

Has anyone installed one of these "Spec" clutch kits I see floating around the US? if so, any feedback on them?

Would it then just make sense to use copper all the time and change frequently?

Looking for some advice mates ... which one would you get? and y? Turbo Blanket: http://cgi.ebay.com/ebaymotors/T3-T4-Turbo-Blanket-Turbo-Heat-Shield-Black_W0QQcmdZViewItemQQ_trksidZp3286Q2ec0Q2em14QQhashZitem439a13ed5fQQitemZ290347806047QQptZMotorsQ5fCarQ5fTruckQ5fPartsQ5fAccessories Heat Shield 1: http://cgi.ebay.com/ebaymotors/STAINLESS-STEEL-TURBO-HEAT-SHIELD-TURBINE-T3-T4-T25-T28_W0QQcmdZViewItemQQ_trksidZp3286Q2ec0Q2em14QQhashZitem518c684873QQitemZ350247995507QQptZMotorsQ5fCarQ5fTruckQ5fPartsQ5fAccessories Heat Shield 2: http://cgi.ebay.com/ebaymotors/Heat-Shield-Polished-Stainless-Turbo-T4-Turbocharger_W0QQcmdZViewItemQQ_trksidZp3286Q2ec0Q2em14QQhashZitem5189c898c6QQitemZ350203975878QQptZMotorsQ5fCarQ5fTruckQ5fPartsQ5fAccessories Thanks

Thanks Mate

LOL .... nonetheless ... good quality stuff I take it?

Anyone know what the small silver or carbon fiber patch that folks put on their rear bumpers over the exhaust to protect it from flames is called? And/or where I can purchase 1. Been searching for one and just can't track it down. Thanks

Thanks matey

Bump

Saw a few threads posted; but nothing conclusive. Anyone know what the lag time on the pink 440cc injectors which come in the 2jzgte vvti is? Cheers

update: Issue sorted; problem was the MAF was on 4" intake rather than stock 3"

A long shot .... but could this be my problem? Even if, I would still be interested in where on the intake it should be hooked up. Before or after the MAF. Thanks

What readings should I be getting from the TPS? 0v off throttle and 5v full throttle?

Long shot; but anyone got the EMU JP settings for VVTi TT. Been having general issues getting my car running(not necessarily related to the the EMU) ..... but would still like to get these verified.