
PhatB
-
Posts
128 -
Joined
Content Type
Profiles
Forums
Store
Blogs
Events
Downloads
Supra Articles
Gallery
Posts posted by PhatB
-
-
Walked past you twice parked outside Jack McPhee's. You seemed to be enjoying chips, or was it a Greggs?
-
missing spats and black gunk on the rear bumper where they used to be stuck on?
I didn't want to mention that
So yes it was you. Enjoy your day out? I take it that was the missus with you?
-
Saw a blue one at about 7.10am on the M8 in Glasgow heading east, it took the M80 junction ****AAA.
Saw another in Byres Road yesterday afternoon in Red. I think it had came down Cresswell Street then onto Byres Road. It had to stop at the pedestrian crossing outside curlers as I was crossing
-
Spotted just parking in Lochburn Road Maryhill outside the entrance to Maryhill Football Club. Think it had a veilside kit, couldn't see the number plate. I was just walking onto Maryhill Road to pick up my Supra from its MOT at In-Tune.
-
That was probably me
i own a silver supra ending in ROS and I was probably heading home from work as I work in Motherwell and stay in Maryhill.
I think that was a Friday around 1pm ish and it had broken down near where I come off the M8!
Sorry I've been slow in replying!
-
MOT time again
luckily my car only failed on one thing and that was the front brake application was uneven.
The tester told me that when the brakes are applied the one takes longer to push the pad to the disk. When the brakes are released they release at the same rate.
Has anyone else had this problem? If so is it just a case of cleaning the piston or could it be something else? If it is the piston is it easy to remove?
Any help would be grateful thanks
-
Passed a red Supra going eastbound on the M8 just after Charing Cross in Glasgow. Think the reg was L***HEN? I was heading east too in the silver Supra.
-
My j-spec n/a has a black wire spliced onto the pink wire, not sure exactly what it does, although when I changed the head unit I managed to pull the black wire out when re-fitting the dash and the mileage never changed. Maybe something to do with that?
-
just measured from edge to edge of wheel and it is 230, but apparently you can't get 18" tyres that are 230 wide. I assume 235 will do?
-
Cheers for that. I'm just trying to find somewhere that sell tyres. I went to Kwik Fit but they just said to go and find out! So much for tyre experts
-
Hoping someone can help me here. I 've managed to get a set of 18" alloys from a scrap yard off a written off mkiv. The alloys didn't have tyres so I was wondering if anyone could advise on what profile tyres etc. I should get.
Cheers
-
Thanks a lot guys that helps. I'm working out Bellshill way from the start of the year so I can call in torque or the garage and try them.
-
Hi guys
I'm going to put my Supra in for a service in the new year. It is a japanese import and will be the first service its had in this country. Can anyone recommend a good garage that will do this in the Glasgow/surrounding area?
Cheers
-
Ta everyone thats helped
thanks
-
Can anyone please tell me what the red button at the automatic gear lever does? Unfortunatly, being a jap import, the writing is in japanese something I am not fully conversant with yet!
Cheers
-
did you buy it from a dealer? if so maybe you could post up the ad to give us an idea of the spec, as it certainly aint stock. welcome to the board by the way
Yes bought it from a dealer, its still on the autotrader website:
And Chilli, yeah I'm probably a bit fat too!
-
No, Mr Bastard does not have a mk3
-
Hi there
I've just bought my first supra after years of driving vauxhall astra's!
The car itself is a single turbo automatic imported from japan but I can't find any information on performance (bhp, top speed, 0-60 etc.). I've been searching the net and all I can find is either twin turbo figures or normally aspirated figures. Can anyone shed some light on this for me?
Cheers
My blue LED conversion dash
in Supra Chat
Posted
I did mine over the last 2 days too. Like you said the heater conttrols were a pain in the arse. I had problems with the ignition barrel too until I realised the fuse had blown
Haven't done the door ring or the window switches yet, and I'll need to buy some more LED's for the gear surround.
Where did you get the gel sheet from for the clock and odo? Was going to get it off ebay but they only sell big sheets