Swampy442 Posted February 27, 2017 Share Posted February 27, 2017 Anyone know where I could get a longer oil filter stud from? My brother bought an Aristo and it came with a plate containing oil pressure and temp, that looks like it fits under the oil filter. Quote Link to comment Share on other sites More sharing options...
ibby Posted February 27, 2017 Share Posted February 27, 2017 I want one of these! Quote Link to comment Share on other sites More sharing options...
T2 MSW Posted February 27, 2017 Share Posted February 27, 2017 (edited) Whifbitz sell them fella http://www.garagewhifbitz.co.uk/garage-whifbitz-3442.html http://www.garagewhifbitz.co.uk/garage-whifbitz-oil-filter-sandwich-plate-3529.html Edited February 27, 2017 by T2 MSW (see edit history) Quote Link to comment Share on other sites More sharing options...
Swampy442 Posted February 27, 2017 Author Share Posted February 27, 2017 Whifbitz sell them fella http://www.garagewhifbitz.co.uk/garage-whifbitz-3442.html http://www.garagewhifbitz.co.uk/garage-whifbitz-oil-filter-sandwich-plate-3529.html Thanks mate, I see an issue though. You have to remove the stock oil cooler to fit one? I was hoping to retain the cooler and fit the plate Quote Link to comment Share on other sites More sharing options...
T2 MSW Posted February 27, 2017 Share Posted February 27, 2017 Thanks mate, I see an issue though. You have to remove the stock oil cooler to fit one? I was hoping to retain the cooler and fit the plate Ahh if you still have the stock cooler, you can fit them with the stock cooler in place, you just need the Inner bolt which I don't think Paul sells separate. I think you can get them on eBay like the below would just have to check the thread http://www.ebay.co.uk/itm/MOCAL-605-OIL-COOLER-SANDWICH-PLATE-3-4UNF-CENTRE-BOLT-FOR-SP1X-OTSP1X-TO-/122211856943?hash=item1c7464f22f:g:C7AAAOSwJ7RYWApn Quote Link to comment Share on other sites More sharing options...
Swampy442 Posted February 27, 2017 Author Share Posted February 27, 2017 Ah brilliant, thanks very much for the help Quote Link to comment Share on other sites More sharing options...
T2 MSW Posted February 27, 2017 Share Posted February 27, 2017 (edited) NPs, make sure the seal on your sandwich plate is in good condition as they tend to pinch when tightened up and then the plate leaks. Dont know why people put about 4000 ft/lbs on them its only a filter and the stock on his done up only a little more than hand tight. I can not get the one thats on my engine undone for love nor money. Edited February 27, 2017 by T2 MSW (see edit history) Quote Link to comment Share on other sites More sharing options...
ibby Posted February 27, 2017 Share Posted February 27, 2017 How tight is it ? It's near the chassis leg Quote Link to comment Share on other sites More sharing options...
T2 MSW Posted February 27, 2017 Share Posted February 27, 2017 With the stock cooler removed you can get a sandwich plate for an oil cooler and the sensor plate on with the standard oil filter no issues Would have to check with the stock cooler in place as I've never run one. Quote Link to comment Share on other sites More sharing options...
Swampy442 Posted February 27, 2017 Author Share Posted February 27, 2017 With the stock cooler removed you can get a sandwich plate for an oil cooler and the sensor plate on with the standard oil filter no issues Would have to check with the stock cooler in place as I've never run one. Ill let you know soon lol Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.