Jake Posted August 10, 2005 Share Posted August 10, 2005 I had a right old struggle getting my prop shaft off so I could sort out my torque converter today. I undid the nuts at both end, undid the two bolts on the centre joint thing and removed that bracket between the centre joint and the diff (what's the bracket for anyway? It doesn't look like it does anything) but the propshaft was still jammed in there. I did manage to wrestle it out eventually but there must be easier way, isn't there? Quote Link to comment Share on other sites More sharing options...
absz Posted August 11, 2005 Share Posted August 11, 2005 no i think thats the way . had same probs. not to sure about the bracket but as a guess i think it will be useful incase your prop joint breaks. it will stop the propshaft from falling down, digging into the ground and fliping the car over Quote Link to comment Share on other sites More sharing options...
Chris Wilson Posted August 11, 2005 Share Posted August 11, 2005 Never had a problem with a propshaft, dead easy yo remove and refit. But I do use a ramp, would be a bit more awkward on the deck. Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.