Jezz Posted August 9, 2005 Share Posted August 9, 2005 Anyone know what fault code 37 is from the t/c ecu?! Quote Link to comment Share on other sites More sharing options...
Ian C Posted August 9, 2005 Share Posted August 9, 2005 No, because it doesn't exist in the TRAC diagnostics or the ABS diagnostics. Or, in fact the main ECU diagnostics?! You sure you read that code right? -Ian Quote Link to comment Share on other sites More sharing options...
Jezz Posted August 10, 2005 Author Share Posted August 10, 2005 Erm, No i didnt read it right. It was a 42. Quote Link to comment Share on other sites More sharing options...
Ian C Posted August 10, 2005 Share Posted August 10, 2005 How did you get 37 instead of 42?! You got a long blink or something Anyway: Main ECU = No1 speed sensor ABS ECU = doesn't exist Trac ECU = doesn't exist So I suspect you are reading your main ECU error codes, not the trac one? -Ian Quote Link to comment Share on other sites More sharing options...
Jezz Posted August 10, 2005 Author Share Posted August 10, 2005 Ok, i just tried again. No fault codes on main ecu, but trac ecu fault seems to be reading 32, not 37. Does a 32 exist on trac? I think i'd had a glass of red wine last night, or two. Quote Link to comment Share on other sites More sharing options...
Ian C Posted August 10, 2005 Share Posted August 10, 2005 Good lord man, work with me here! ABS ECU says Left Front Wheel Sensor Trac ECU says the same thing. So, it's yer left front wheel sensor, or more to the point, the signal from that isn't reaching the ECU so it's either buggered sensor, damaged wiring, or knackered plug. Perhaps it, too, has been on the red wine -Ian Quote Link to comment Share on other sites More sharing options...
Jezz Posted August 10, 2005 Author Share Posted August 10, 2005 I think the confusion came from not resetting the ecu first. Basically i took fuses out for a min, then re-checked faults. Main ecu had no faults, abs had none, but trac had the 32. And now i know what that means. Ian, you're a technical legend!! Quote Link to comment Share on other sites More sharing options...
Ian C Posted August 11, 2005 Share Posted August 11, 2005 Easy tiger, I'm only reading stuff out of a PDF Get this, right - the way to clear the ABS and TRAC ecu of fault codes is - while the light is flashing the codes up, hit the brake pedal 8 times within 3 seconds! The light will pause and then start it's regular half second blinks. I think that's really cool, no idea why though -Ian Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.