Dave Posted May 21, 2017 Share Posted May 21, 2017 So I set my throttle position sensor to try and cure my overdrive problem . So as you look at the sensor with the plug off it's the top two connectors that you put you multimeter probes on ,then loosen the TPS ,and turn very gently clockwise until you get 1.000000 on the meter,then set the screws If I have done this wrong please leave a comment . Btw it didn't cure my problem . Pic is of the meter at reflect Quote Link to comment Share on other sites More sharing options...
Dave Posted May 25, 2017 Author Share Posted May 25, 2017 All done and not one reply Quote Link to comment Share on other sites More sharing options...
Ric Posted May 25, 2017 Share Posted May 25, 2017 Is this how you set the TPS is it? seems easy, i thought it was a nightmare job. Shame it didnt fix your issue Quote Link to comment Share on other sites More sharing options...
Dave Posted May 25, 2017 Author Share Posted May 25, 2017 Is this how you set the TPS is it? seems easy, i thought it was a nightmare job. Shame it didnt fix your issue well a 10 minute job for someone who knows what there doing took me best part of hour and half lol look in davidp gearbox thread for instuctions if your planning on having a go . Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.