PDA

View Full Version : Sold RPS Streetmax Clutch Cover and Disc



TheTurtleshead
24-07-15, 22:53
Used but in fine fettle. I ended up changing this as I thought that it was at fault for the clutch failing to disengage. When my new clutch also would not disengage it became clear that there was nothing wrong with this one.

If I hadn't believed this was at fault I'd never have changed it out, it's a brilliant clutch! It held 660ft/lbs and 708HP on my car, with a standard 6 speed driven plate. The only sacrafice you have to make over a stock clutch is 130% pedal stiffness, so 30% stiffer than stock. Trust me, it's not that bad, you get used to it and forget about it soon enough. It has 100% stock engagement, and is 100% quiet as it uses the OEM Dual Mass Flywheel. So no juddering and no rattling!

Truly a great clutch for a single supra.

Condition;

Cover plate- Some superficial marks, good working order.

Driven plate- Used but I bought it new. The friction plate hasn't even worn across 100% of it's face yet as you can see in the pictures. Loads of life left yet!

250 + post or collection for a 700HP capable clutch setup... Bargin!

http://www.mkivsupra.net/vbb/attachment.php?attachmentid=203525&stc=1&d=1437774700
http://www.mkivsupra.net/vbb/attachment.php?attachmentid=203526&stc=1&d=1437774700
http://www.mkivsupra.net/vbb/attachment.php?attachmentid=203527&stc=1&d=1437774700

TheTurtleshead
29-07-15, 20:33
Bump! Surely someone is going single and wants a bargain clutch? :D

TheTurtleshead
05-08-15, 23:34
Bumpington!

TheTurtleshead
12-08-15, 21:58
Buuuuummmppp! :)

TheTurtleshead
12-08-15, 22:19
The rattle from my LA twin with lightweight flywheel is a bit annoying, genuinely so much nicer with a DMF and this fitted! If I hadn't sold my almost new DMF I'd probably change it back!

2JZ inside
12-08-15, 23:18
Just out of curiosity what sort of rattle noise do you experience and when / what rpm range ? I bought the car with aftermarket flywheel and paddle clutch and it seems to make rattling noise on low rmp's up to 2000 not sure if it's the clutch or flywheel which makes noise.

Dim Sum
13-08-15, 12:19
Just out of curiosity what sort of rattle noise do you experience and when / what rpm range ? I bought the car with aftermarket flywheel and paddle clutch and it seems to make rattling noise on low rmp's up to 2000 not sure if it's the clutch or flywheel which makes noise.

That be the flywheel.

I have the the RPS street clutch max like TheTurtleshead but I also install the RPS Cyn-R-G Segmented Flywheel which is causing the noise you are referring too. I am planning to change it back to the stock OEM flywheel to remove the rattling.

I recommend this clutch.

2JZ inside
13-08-15, 17:03
Thanks.

TheTurtleshead
27-08-15, 08:44
Still here!

TheTurtleshead
09-09-15, 21:49
Anyone? Can drop to JAE..!

SilentAgro
05-04-16, 20:37
Do you still have this clutch?

I have one in my car at the moment and like it a lot. Don't see many of these around now?

TheTurtleshead
05-04-16, 20:49
Long sold now!

Yeah it is a nice clutch, tiny bit heavy, but worth putting up with as it retains the oem DMF so is perfectly quiet. Using it with a stock full face disc means it's nice and smooth with no engagement judder.

SilentAgro
05-04-16, 20:51
I have a lightened flywheel of some sort. It works well for me though.

Can you get these new?