Zofix Posted August 19, 2008 Share Posted August 19, 2008 Since I installed a oil temp gauge on my MKIV its been leaking oil and I'm really tired of it. I plugged the temp sensor in a GReddy sandwitch plate between the oil filter and the block. I removed the filter and tightened the sandwitch plate twice, and there is still a oil leak. The only solution I can see is to remove the sandwitch plate and use the sensor as the oil drain nut(the nut you unplug when you flush the oil). But I have no idea if it fits? I know the Defi oil temp sensor is 1/8 NPT, Do you know if it fits or have any solution to my problem, what did all you guys do? [sAD][/sAD] I guess almost everybody installed a oil temp gauge. Quote Link to comment Share on other sites More sharing options...
Chris Wilson Posted August 19, 2008 Share Posted August 19, 2008 I can supply an adaptor to allow you to fit the sender into the sump, and to take the place of the stock sump plug. E-mail me (no PM's) or ring me if interested. 07971-952084 office hours only please. thanks. I have these in stock. Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.