brettjones Posted April 9, 2008 Share Posted April 9, 2008 hi all i have new cams from a uk-spec i am going to put them in my j-spec will i need anything else as i am thinking of doing it my self any advice would be helpful Quote Link to comment Share on other sites More sharing options...
Nic Posted April 9, 2008 Share Posted April 9, 2008 hi all i have new cams from a uk-spec i am going to put them in my j-spec will i need anything else as i am thinking of doing it my self any advice would be helpful The exhaust cams are the same on the J-spec and UK spec, only the intake cam is higher lift and duration. I'd change the cam shaft seals and cam cover seals at the same time, the cams will probably also need shimming. Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.